{"product_id":"multi-fittings-corporation-340342-pvc-sdr-35-4-in-adapter","title":"Multi-fittings Corporation 340342 Pvc Sdr 35 4 in Adapter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MULTI-FITTINGS CORPORATION 340342 is a 4-inch PVC SDR 35 hub-by-spigot adapter designed for gravity-flow drainage and sewer piping systems. Manufactured to ASTM D-3034 standards, this adapter transitions between hub and spigot connections using solvent-weld joinery that produces a leak-proof, root-resistant seal when properly installed. The PVC construction provides strong chemical resistance against acids, alkalis, and diluted hydrocarbons, and the fitting handles aggressive soil conditions including sulfates, carbonates, industrial effluents, and acid rain without degradation. Rated to a maximum service temperature of 140 degrees F, it suits a wide range of residential and light commercial below-grade applications. Licensed plumbers and sewer contractors are the primary installers of this fitting.\u003c\/p\u003e\n\u003cp\u003eThis adapter is used in below-grade sanitary sewer and storm drainage piping where a spigot-end pipe or fitting must connect into a hub-end fitting, or vice versa. Typical installations include mainline sewer lateral runs, cleanout configurations, and tie-in points within trench-laid PVC gravity systems. The SDR 35 wall dimension is standard for 4-inch sewer service lines across residential and light commercial construction. Its high abrasion resistance makes it a reliable choice in high-velocity storm sewer applications where transported effluent may carry particulate matter. Both CSA B182.1 and CSA B182.2 certification, plus IAPMO listing, support use in jurisdictions requiring listed fittings for sewer installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eASTM D-3034 compliant PVC SDR 35 construction for standard gravity sewer service\u003c\/li\u003e\n\u003cli\u003eSolvent-weld hub-by-spigot configuration creates a leak-proof joint that eliminates underground infiltration and exfiltration\u003c\/li\u003e\n\u003cli\u003eExceptional chemical resistance to acids, alkalis, sulfates, carbonates, and diluted hydrocarbons\u003c\/li\u003e\n\u003cli\u003eHighly resistant to abrasion, suitable for high-velocity storm sewer and abrasive effluent transport\u003c\/li\u003e\n\u003cli\u003eCSA B182.1, CSA B182.2 certified and IAPMO listed for code-compliant installations\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature of 140 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard component for 4-inch PVC SDR 35 gravity sewer and drainage piping systems conforming to ASTM D-3034.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with local plumbing codes and applicable IPC or regional sewer system standards. Clean and deburr all pipe ends, then apply the appropriate PVC solvent cement primer and cement to both the spigot and hub surfaces before joining. Allow adequate cure time before backfilling the trench, following the cement manufacturer's published schedule for the ambient temperature at the time of installation. Do not use mechanical force to correct misaligned joints after the solvent cement has been applied.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections\u003c\/strong\u003e: Spigot x Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule Class\u003c\/strong\u003e: SDR 35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 140 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Drainage, Sewer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASTM Standard\u003c\/strong\u003e: ASTM D-3034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCSA Certified\u003c\/strong\u003e: CSA B182.1, CSA B182.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF\u003c\/strong\u003e: NSF 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIAPMO Listed\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: Global\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MULTI-FITTINGS CORPORATION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 340342\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MULTI-FITTINGS CORPORATION","offers":[{"title":"Default Title","offer_id":51523405873458,"sku":"340342","price":16.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/05f46a55256d3fdbaeab0d46762fb3b3.jpg?v=1785441977","url":"https:\/\/voomisupply.com\/products\/multi-fittings-corporation-340342-pvc-sdr-35-4-in-adapter","provider":"Voomi Supply","version":"1.0","type":"link"}