{"product_id":"mueller-industries-a-2361-23-resilient-wedge-gate-valve","title":"Mueller Industries a-2361-23 Resilient Wedge Gate Valve","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MUELLER INDUSTRIES a-2361-23 is a resilient wedge gate valve rated for 350 psi maximum working pressure, designed for potable water distribution systems. Available in sizes ranging from 3 inches through 12 inches, this valve features a non-rising stem (NRS) configuration and standard mechanical joint ends that comply with ANSI\/AWWA C111. Interior and exterior surfaces receive a nominal 10-mil Pro-Gard Fusion Bonded Epoxy coating meeting ANSI\/AWWA C550 requirements. The fully encapsulated iron wedge leaves no exposed iron, and a triple O-ring seal stuffing box provides reliable sealing performance. Licensed plumbers and waterworks contractors are the typical installers for this product.\u003c\/p\u003e\n\u003cp\u003eThis gate valve is suited for potable water main installations in both municipal and commercial waterworks applications. It is rated UL Listed and FM Approved at 350 psi and certified to NSF\/ANSI\/CAN 61 and 372, making it appropriate for systems that require compliance with drinking water safety standards. The 2-inch square wrench nut accommodates standard operating keys and can be configured for open-left or open-right operation depending on system requirements. Available sizes include 3, 4, 6, 8, 10, and 12 inches to cover a range of mainline and branch service applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e350 psi maximum working pressure with 700 psi static test pressure rating\u003c\/li\u003e\n  \u003cli\u003eNon-rising stem design suitable for installations with limited vertical clearance\u003c\/li\u003e\n  \u003cli\u003eIron wedge fully encapsulated with molded rubber, eliminating exposed iron surfaces\u003c\/li\u003e\n  \u003cli\u003eNominal 10-mil Pro-Gard Fusion Bonded Epoxy coating on all interior and exterior surfaces\u003c\/li\u003e\n  \u003cli\u003eTriple O-ring seal stuffing box: two seals above the thrust collar, one below\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI\/AWWA C515, UL 262 Listed, FM 1120\/1130 Approved, NSF\/ANSI\/CAN 61 and 372 certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eStandard mechanical joint ends comply with ANSI\/AWWA C111, making this valve compatible with standard mechanical joint pipe and fittings used in municipal potable water distribution systems. Available in 3, 4, 6, 8, 10, and 12 inch sizes.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or certified waterworks contractor in accordance with local codes and ANSI\/AWWA standards. Depressurize and isolate the line before beginning any valve installation or service work. Standard mechanical joint assembly requires appropriate gaskets, glands, and bolts per ANSI\/AWWA C111 specifications. Verify that the operating nut orientation, open-left or open-right, matches the system requirements before final installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 350 psi (2400 kPa \/ 24 barg)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Test Pressure\u003c\/strong\u003e: 700 psi (4800 kPa \/ 48 barg)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Sizes\u003c\/strong\u003e: 3, 4, 6, 8, 10, 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStem Type\u003c\/strong\u003e: Non-rising stem (NRS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Mechanical joint (MJ x MJ), ANSI\/AWWA C111\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Nut\u003c\/strong\u003e: 2-inch square wrench nut, open-left or open-right\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterior\/Exterior Coating\u003c\/strong\u003e: Nominal 10-mil Fusion Bonded Epoxy (ANSI\/AWWA C550)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWedge Material\u003c\/strong\u003e: Iron, fully encapsulated with molded rubber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL 262 Listed, FM 1120\/1130 Approved, NSF\/ANSI\/CAN 61, NSF\/ANSI\/CAN 372, ANSI\/AWWA C515\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Potable water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MUELLER INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: a-2361-23\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MUELLER INDUSTRIES","offers":[{"title":"Default Title","offer_id":51268236607794,"sku":"A-2361-23","price":1465.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308912711.png?v=1780702515","url":"https:\/\/voomisupply.com\/products\/mueller-industries-a-2361-23-resilient-wedge-gate-valve","provider":"Voomi Supply","version":"1.0","type":"link"}