{"product_id":"mueller-industries-2890-abs-45-degree-dwv-elbow-1-1-2-in","title":"Mueller Industries 2890 Abs 45 Degree Dwv Elbow 1-1\/2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MUELLER INDUSTRIES 2890 is a 1-1\/2 inch ABS 45-degree street elbow rated for DWV (drain, waste, and vent) applications. The spigot x hub configuration allows direct connection into a hub-end fitting without a coupling, simplifying inline changes of direction. Constructed in ABS thermoplastic, this elbow handles residential and commercial drainage piping, mechanical systems, and a broad range of low-pressure fluid and gas services. At 0.13 pounds, it is lightweight and easy to position during rough-in work. The fitting carries a 50-year warranty, reflecting long service life in properly installed systems.\u003c\/p\u003e\n\u003cp\u003eThis elbow is suited for residential and commercial plumbing drain and vent stacks, hydronic heating systems using glycol, chilled water lines, compressed air systems up to 200 psi, non-medical gas lines up to 140 psi, low-pressure steam up to 15 psi, and vacuum systems up to 24.5 inches of mercury at 68 degrees F. Licensed plumbers install this fitting during rough-in framing stages and remodel work where a 45-degree change of direction is needed in a drain or vent run.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45-degree street elbow allows direction change without an additional coupling\u003c\/li\u003e\n  \u003cli\u003eSpigot x hub end configuration for direct insertion into existing hub fittings\u003c\/li\u003e\n  \u003cli\u003eABS construction is lightweight at 0.13 pounds and corrosion resistant\u003c\/li\u003e\n  \u003cli\u003eRated for compressed air up to 200 psi and non-medical gases up to 140 psi\u003c\/li\u003e\n  \u003cli\u003eLow-pressure steam rated up to 15 psi and vacuum up to 24.5 inches of mercury\u003c\/li\u003e\n  \u003cli\u003e50-year warranty backing long-term service in plumbing and mechanical systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a DWV-type replacement or new-installation fitting for 1-1\/2 inch ABS drain, waste, and vent piping systems in residential and commercial construction.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and local amendments. Ensure all water or fluid flow is shut off and the line is depressurized before cutting into an existing system. ABS street elbows are joined using ABS solvent cement applied to both the spigot end and the receiving hub; follow cement manufacturer cure times before restoring flow. Do not use this fitting in applications that exceed the rated pressures or temperatures for ABS thermoplastic pipe and fittings.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAngle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Size\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Spigot x Hub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Street Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: ABS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Compressed Air Pressure\u003c\/strong\u003e: 200 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Non-Medical Gas Pressure\u003c\/strong\u003e: 140 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Low-Pressure Steam\u003c\/strong\u003e: 15 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Vacuum\u003c\/strong\u003e: 24.5 inches of mercury at 68 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 3.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 50 Years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MUELLER INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2890\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MUELLER INDUSTRIES","offers":[{"title":"Default Title","offer_id":51619986342194,"sku":"2890","price":15.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c46e86f9368d8d44748a63feb892fcc3.jpg?v=1787338266","url":"https:\/\/voomisupply.com\/products\/mueller-industries-2890-abs-45-degree-dwv-elbow-1-1-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}