{"product_id":"msi-products-inc-a201021612-malleable-iron-90-reducing-elbow","title":"Msi Products Inc A201021612 Malleable Iron 90 Reducing Elbow","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MSI PRODUCTS INC A201021612 is a 150 lb black malleable iron 90 degree reducing elbow designed for threaded piping systems. It changes flow direction while transitioning between pipe sizes, with a 1 inch inlet and a 3\/4 inch outlet. Built in a heavy pattern design from malleable iron, this fitting delivers the mechanical strength needed for everyday plumbing, gas distribution, and industrial piping applications. It is rated for 150 to 300 psi service. Each fitting carries full lot traceability with material test reports available on request, supporting quality assurance and compliance documentation requirements for commercial and industrial projects.\u003c\/p\u003e\n\u003cp\u003eThis reducing elbow is suited for residential and commercial threaded piping installations where a 90 degree directional change and a line-size reduction are required in a single fitting. Typical applications include gas piping, water distribution, steam, and compressed air systems. It is well suited for both new construction and retrofit or modification work on existing threaded piping systems. Licensed plumbers and pipefitters are the primary installers for this type of fitting in code-governed installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1 inch x 3\/4 inch reducing configuration combines a 90 degree turn and a size transition in one fitting\u003c\/li\u003e\n  \u003cli\u003e150 lb malleable iron construction in a heavy pattern design for reliable service strength\u003c\/li\u003e\n  \u003cli\u003eRated 150 to 300 psi working pressure\u003c\/li\u003e\n  \u003cli\u003eBlack finish malleable iron suitable for gas, water, steam, and compressed air service\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B16.3, ASTM A197, and ASME B1.20.1 standards for consistent fit and thread form\u003c\/li\u003e\n  \u003cli\u003eFull lot traceability with material test reports available upon request for quality and compliance documentation\u003c\/li\u003e\n  \u003cli\u003eManufactured in an ISO-certified facility with tested performance and consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard fitting for 1 inch x 3\/4 inch threaded piping systems conforming to ASME B16.3 and ASME B1.20.1 NPT thread standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber or pipefitter in accordance with applicable codes such as the International Plumbing Code or International Fuel Gas Code. Shut off and depressurize the piping system completely before removing or installing any threaded fitting. Apply appropriate thread sealant or PTFE tape to the male threads before assembly and tighten to the fitting manufacturer's standard hand-tight-plus-turns practice for NPT connections. Do not over-torque malleable iron fittings, as the material is strong but not ductile under excessive mechanical stress.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Size\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutlet Size\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 150 to 300 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePattern\u003c\/strong\u003e: Heavy, 150 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded (NPT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B16.3, ASTM A197, ASME B1.20.1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.57 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 6 inches x 4 inches x 4 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MSI PRODUCTS INC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: A201021612\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSI PRODUCTS INC","offers":[{"title":"Default Title","offer_id":68097717600562,"sku":"A201021612","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9c84603348600c6f9f39254ac54d4d27_91b1df36-d3c5-4346-8796-2fdd813e5493.jpg?v=1793269982","url":"https:\/\/voomisupply.com\/products\/msi-products-inc-a201021612-malleable-iron-90-reducing-elbow","provider":"Voomi Supply","version":"1.0","type":"link"}