{"product_id":"msa-10058318-full-brim-hard-hat-type-1-class-e-v-gard","title":"Msa 10058318 Full Brim Hard Hat Type 1 Class E V-gard","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MSA 10058318 is a full brim hard hat built for job sites where head protection against impact and electrical hazards is required. Part of the MSA V-Gard series, this helmet is constructed from polyethylene and features an 8-point nylon suspension system with pinlock adjustment. It meets ANSI Type I and Class E ratings, meaning it is tested for top-impact resistance and high-voltage electrical protection up to 20,000 volts. The full brim design provides added protection from sun, rain, and debris on all sides. This hard hat is unvented and unslotted, which suits environments where particulate exposure is a concern.\u003c\/p\u003e\u003cp\u003eThis hard hat is suited for commercial construction, industrial facilities, utilities, and heavy infrastructure work where ANSI\/ISEA Z89.1-2014 and CSA Z94.1-2014 compliance is required. The pinlock suspension accommodates a wide range of head sizes from 6-1\/2 to 8, making it practical for crews where one size must fit multiple workers. It is installed and worn by electricians, general contractors, linemen, and other trade professionals working in environments with overhead impact risk and potential electrical exposure.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eANSI\/ISEA Z89.1-2014 and CSA Z94.1-2014 compliant for Type I, Class E service\u003c\/li\u003e\n\u003cli\u003eFull brim construction provides 360-degree protection from sun, rain, and falling debris\u003c\/li\u003e\n\u003cli\u003e8-point nylon suspension distributes impact force and improves all-day comfort\u003c\/li\u003e\n\u003cli\u003ePinlock adjustment system fits head sizes 6-1\/2 to 8\u003c\/li\u003e\n\u003cli\u003ePolyethylene shell is unvented and unslotted for particulate-sensitive environments\u003c\/li\u003e\n\u003cli\u003ePart of the MSA V-Gard series, a widely recognized standard in industrial head protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard replacement or new-issue hard hat within the MSA V-Gard series. Compatible with MSA V-Gard accessories designed for full brim shells. Verify accessory attachment compatibility before use.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eHard hat fitting and inspection should be performed by the wearer before each use per employer safety programs and ANSI guidelines. Inspect the shell and suspension for cracks, chalking, or UV degradation before issuing or wearing. Replace the hard hat immediately after any impact event, even if no visible damage is present. Do not modify, drill, or paint the shell, as this may compromise the structural integrity and void compliance ratings.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: V-Gard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: Full Brim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Type\u003c\/strong\u003e: I\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass Rating\u003c\/strong\u003e: E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension\u003c\/strong\u003e: 8-Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension Material\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type\u003c\/strong\u003e: Pinlock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell Material\u003c\/strong\u003e: Polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Head Size\u003c\/strong\u003e: 6-1\/2 to 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 6.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\/ISEA Z89.1-2014, CSA Z94.1-2014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.85 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10058318\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSA SAFETY","offers":[{"title":"Default Title","offer_id":51716588241202,"sku":"10058318","price":32.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cc48427639eecc48e7365e2a8ffff0f9.jpg?v=1788528414","url":"https:\/\/voomisupply.com\/products\/msa-10058318-full-brim-hard-hat-type-1-class-e-v-gard","provider":"Voomi Supply","version":"1.0","type":"link"}