{"product_id":"mitsubishi-662291-carbide-drill-bit-1-8-inch-tialn-mve","title":"Mitsubishi 662291 Carbide Drill Bit 1\/8 Inch Tialn Mve","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MITSUBISHI 662291 is a solid carbide extra length drill bit designed for precision drilling in demanding metalworking applications. Measuring 0.1250 inches (1\/8 inch) in diameter with a 2.1880-inch overall length and a 0.7320-inch flute length, this bit is built for reaching depth where standard-length drills fall short. The TiAlN coating improves heat resistance and extends tool life in high-speed cutting environments. A 140-degree split point with X-thinning reduces thrust and improves centering without a pilot hole. The two-flute helical design promotes chip evacuation in interrupted and stacked workpieces. Installed by machinists and tool-room technicians, this bit suits CNC and manual drilling operations on ferrous and non-ferrous metals.\u003c\/p\u003e\n\u003cp\u003eThe 662291 is rated for steel, stainless steel, cast iron, carbon steel, hardened steel, tempered steel, nickel alloys, superalloys, titanium, copper, brass, bronze, and high-strength bronze. Its MVE series designation places it in a high-performance, high-precision product family engineered for cross-hole drilling, through drilling, and stack drilling applications. The cylindrical shank measures 0.236 inches in diameter and 1.3390 inches in length, fitting standard drill chucks and collet holders without modification. Maximum drilling depth is rated at 0.2740 inches, consistent with its 2xD flute-to-diameter ratio.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with TiAlN finish for extended tool life in high-heat cutting\u003c\/li\u003e\n  \u003cli\u003e140-degree drill point angle with X-thinning for reduced thrust and accurate self-centering\u003c\/li\u003e\n  \u003cli\u003eTwo-flute right-hand helical design promotes chip clearance in stack and cross-hole drilling\u003c\/li\u003e\n  \u003cli\u003eExtra length OAL of 2.1880 inches provides reach for deep or obstructed bore locations\u003c\/li\u003e\n  \u003cli\u003eParallel web configuration and cylindrical shank for consistent runout in collet or chuck setups\u003c\/li\u003e\n  \u003cli\u003eRated for a broad range of workpiece materials including hardened steel, nickel alloys, and titanium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers, drill presses, and manual machines with standard collet or drill chuck toolholding. Suitable for cross-hole, through-hole, and stack drilling operations in steel, stainless steel, cast iron, hardened steel, tempered steel, nickel alloys, superalloys, titanium, copper, brass, bronze, and cast iron per the MVE series application rating.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or toolroom technicians familiar with carbide tooling. Ensure the spindle and workpiece are fully secured and the machine is at a complete stop before changing tooling. Carbide drill bits are brittle and sensitive to side loading — avoid lateral force during entry and retraction. Verify spindle RPM and feed rate are appropriate for the workpiece material and bit diameter before initiating a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 0.1250 inches (1\/8 inch \/ 3.18 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.1880 inches (55.58 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.7320 inches (18.59 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.236 inches (6.0 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.3390 inches (34.01 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 0.2740 inches (6.96 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 0.0230 inches (0.58 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical, Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 2xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Parallel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: X-Thinning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: MVE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification Designation\u003c\/strong\u003e: ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241637\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MITSUBISHI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 662291\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MITSUBISHI ELECTRIC","offers":[{"title":"Default Title","offer_id":51693566689586,"sku":"662291","price":109.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/735282b93adbbeef836ca7615b93520e.jpg?v=1788314171","url":"https:\/\/voomisupply.com\/products\/mitsubishi-662291-carbide-drill-bit-1-8-inch-tialn-mve","provider":"Voomi Supply","version":"1.0","type":"link"}