{"product_id":"mitsubishi-602626-ccmt-turning-insert-cermet-pvd","title":"Mitsubishi 602626 Ccmt Turning Insert Cermet Pvd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MITSUBISHI 602626 is a CCMT-style indexable turning insert designed for precision metal cutting on CNC lathes and turning centers. Built from cermet substrate with a PVD coating, this insert carries manufacturer grade MP3025 and is engineered for high wear-resistance through high toughness on steel workpieces. It features an 80-degree diamond (rhombic) insert shape, a 7-degree relief angle, a corner radius of 0.40 mm (0.0156 inches), and provides 2 cutting edges per insert. Licensed machinists and CNC operators install this insert in compatible CCMT toolholders as part of routine insert indexing or replacement.\u003c\/p\u003e\u003cp\u003eThis insert is suited for finish to semi-finish turning of steel (ISO material group P). The pressed chip breaker geometry supports consistent chip control across a range of feed rates and depths of cut. With a neutral hand designation, it fits standard right-hand and left-hand CCMT-pocket toolholders configured for neutral orientation. Typical applications include shaft turning, facing, and contour work on production or job-shop lathes handling steel and similar ferrous materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCCMT insert style with 80-degree diamond (rhombic) shape for strong cutting edge geometry\u003c\/li\u003e\n\u003cli\u003eCermet substrate with PVD coating — grade MP3025 for wear-resistance on steel\u003c\/li\u003e\n\u003cli\u003eCorner radius of 0.40 mm (1\/64 inch) for controlled surface finish\u003c\/li\u003e\n\u003cli\u003ePositive side clearance with 7-degree relief angle reduces cutting forces\u003c\/li\u003e\n\u003cli\u003ePressed chip breaker for reliable chip management in continuous cuts\u003c\/li\u003e\n\u003cli\u003e2 cutting edges per insert for cost-effective indexing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement for CCMT21.51 (ANSI) or CCMT060204 (ISO) insert pockets in standard CCMT-style turning toolholders accepting neutral-hand inserts with a 1\/4-inch inscribed circle.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert replacement and indexing should be performed by a qualified machinist or CNC operator with the machine powered off and in a locked-out state per applicable OSHA lockout\/tagout procedures. Use a torx or hex key of the correct size for the toolholder clamp screw — do not overtighten, as this can crack the insert or damage the pocket seat. Inspect the pocket seat and clamping components for wear or debris before seating a new insert. Handle cermet inserts carefully to avoid chipping the cutting edges prior to use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: CCMT21.51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: CCMT060204\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CCMT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: C - Diamond (Rhombic) 80-Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Cermet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: MP3025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.40 mm (1\/64 inch \/ 0.0156 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.2500 inches (6.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.0938 inches (3\/32 inch \/ 2.38 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: Pressed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO Group P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade Characteristics\u003c\/strong\u003e: High Wear-Resistance to High Toughness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.04 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MITSUBISHI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 602626\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MITSUBISHI ELECTRIC","offers":[{"title":"Default Title","offer_id":51690873323826,"sku":"602626","price":187.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5d5d2e88ccfb45b4d42f46ead10fbf4d.jpg?v=1788276715","url":"https:\/\/voomisupply.com\/products\/mitsubishi-602626-ccmt-turning-insert-cermet-pvd","provider":"Voomi Supply","version":"1.0","type":"link"}