{"product_id":"mitsubishi-251328-ccgt-turning-insert-vp10rt-carbide","title":"Mitsubishi 251328 Ccgt Turning Insert VP10RT Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MITSUBISHI 251328 is a CCGT-style carbide turning insert designed for precision metal cutting on CNC and manual lathes. It carries ANSI insert code CCGT21.5V5 and ISO insert code CCGT0602V5, identifying its geometry, tolerance, and chip breaker configuration at a glance. The insert is manufactured from carbide in the VP10RT grade and finished with a PVD coating for wear resistance in high-speed finishing and light interrupted cuts. With a corner radius of 0.002 inches (0.05 mm) and an 80-degree rhombic insert shape, this insert is suited to fine-finish turning passes where tight tolerances and surface finish matter. Licensed machinists and CNC operators are the primary installers.\u003c\/p\u003e\u003cp\u003eThis insert is intended for finishing and light semi-finishing turning operations on ferrous and non-ferrous materials where a sharp cutting edge and minimal corner radius are required. The 7-degree relief angle provides clearance geometry appropriate for positive-rake toolholders. The FJ chip breaker geometry supports controlled chip formation during low-depth, high-feed finishing cuts. Typical applications include precision shaft turning, bore finishing on horizontal lathes, and close-tolerance diameter work in aerospace, automotive, and general machining environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eANSI code CCGT21.5V5 and ISO code CCGT0602V5 for direct toolholder cross-reference\u003c\/li\u003e\n\u003cli\u003eVP10RT carbide grade with PVD coating for extended tool life in finishing cuts\u003c\/li\u003e\n\u003cli\u003e0.002 inch (0.05 mm) corner radius for tight-tolerance and fine-surface-finish work\u003c\/li\u003e\n\u003cli\u003e80-degree rhombic insert shape (C shape) with 7-degree relief angle\u003c\/li\u003e\n\u003cli\u003eFJ chip breaker promotes controlled chip evacuation in light cuts\u003c\/li\u003e\n\u003cli\u003eNeutral hand orientation compatible with standard CCGT toolholders\u003c\/li\u003e\n\u003cli\u003e2 cutting edges per insert for cost-effective use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in toolholders accepting CCGT-style inserts with a 1\/4 inch inscribed circle and 3\/32 inch insert thickness, conforming to ANSI and ISO CCGT geometry standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eTurning insert replacement should be performed by a qualified machinist or CNC operator with the machine powered off and spindle locked. Seat the insert firmly against the toolholder pocket and torque the clamping screw according to the toolholder manufacturer specification. Inspect the pocket and clamp for debris or damage before seating a new insert. Always verify insert orientation and cutting edge engagement before resuming machine operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: CCGT21.5V5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: CCGT0602V5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CCGT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Rhombic 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.002 inches (0.05 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: VP10RT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: FJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.250 inches (6.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.0938 inches (2.38 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MITSUBISHI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 251328\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MITSUBISHI ELECTRIC","offers":[{"title":"Default Title","offer_id":51696523378994,"sku":"251328","price":252.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b13553668222b5fc5ba81974c9641cf1.jpg?v=1788343533","url":"https:\/\/voomisupply.com\/products\/mitsubishi-251328-ccgt-turning-insert-vp10rt-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}