{"product_id":"mitsubishi-10576588-vcgt-carbide-turning-insert","title":"Mitsubishi 10576588 Vcgt Carbide Turning Insert","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MITSUBISHI 10576588 is a VCGT-style carbide turning insert designed for precision metal cutting operations on CNC lathes and turning centers. Featuring a rhombic insert shape with a 35-degree included angle and a 7-degree relief angle, this insert is engineered for light finishing and fine finishing passes where tight tolerances and superior surface finish are required. The 0.40 mm corner radius and PVD coating combine to support consistent cutting performance on a range of workpiece materials. With two cutting edges per insert, machinists get extended tool life per unit. The MP9015 grade designation indicates suitability for demanding finishing applications.\u003c\/p\u003e\u003cp\u003eThis insert is intended for use in turning applications where fine surface finishes and accurate dimensional control are critical. The VCGT style with a neutral hand orientation fits a wide range of standard toolholders used in production and job-shop turning environments. The LS chip breaker geometry supports chip control during light finishing cuts. This insert suits residential machine shops, production facilities, and toolrooms running CNC or manual turning equipment on ferrous and non-ferrous materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eVCGT insert style with rhombic shape and 35-degree included angle for acute-angle turning\u003c\/li\u003e\n\u003cli\u003e0.40 mm (1\/64 inch) corner radius for fine finishing and tight-radius contour work\u003c\/li\u003e\n\u003cli\u003e7-degree relief angle (clearance code C) for reduced cutting forces on finishing passes\u003c\/li\u003e\n\u003cli\u003ePVD coating over carbide substrate for wear resistance and edge integrity\u003c\/li\u003e\n\u003cli\u003eMP9015 manufacturer grade optimized for finishing-cut applications\u003c\/li\u003e\n\u003cli\u003eLS chip breaker geometry for controlled chip formation at light depths of cut\u003c\/li\u003e\n\u003cli\u003eNeutral hand orientation compatible with standard VCGT toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit insert for standard VCGT-style turning toolholders accepting a 1\/4-inch inscribed circle insert with a 1\/8-inch insert thickness.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician familiar with indexable insert tooling. Power down and lock out the machine before seating or indexing the insert. Ensure the toolholder pocket and clamp are clean and free of chips before installing the insert to maintain proper seating and edge alignment. Follow the toolholder manufacturer's clamping torque guidelines and do not over-torque the clamp screw.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: VCGT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Rhombic (V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.40 mm (0.0156 inches \/ 1\/64 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.2500 inches (6.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1250 inches (3.18 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: MP9015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: LS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MITSUBISHI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10576588\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MITSUBISHI ELECTRIC","offers":[{"title":"Default Title","offer_id":51720690794802,"sku":"10576588","price":358.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d7addb827678e5bb00bac8f77de8f95a_f83d0bf5-5cbb-4999-8b96-9c7aa7394bf8.jpg?v=1788567759","url":"https:\/\/voomisupply.com\/products\/mitsubishi-10576588-vcgt-carbide-turning-insert","provider":"Voomi Supply","version":"1.0","type":"link"}