{"product_id":"minerallac-602-beam-clamp-3-4-in-flange-3-8-in-tapped-zinc-plated","title":"Minerallac 602 Beam Clamp 3\/4 in Flange 3\/8 in Tapped Zinc Plated","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MINERALLAC 602 is a steel set screw beam clamp designed for suspending conduit, bridle rings, and threaded rod from structural steel beams. It accepts flanges up to 3\/4 inches wide and features a 3\/8 inch-16 tapped hole on the bottom for rod or hanger attachment. The clamp is fabricated from 11-gauge steel with a zinc-plated finish for corrosion resistance. A case-hardened set screw, tapped at an angle, locks firmly onto the beam flange with a rated torque of 60 in-lbf and supports a maximum load of 200 pounds. Licensed electricians and electrical contractors install this fitting in commercial and industrial conduit support applications.\u003c\/p\u003e\n\u003cp\u003eThe MINERALLAC 602 is suited for use in commercial and industrial electrical installations where conduit runs, bridle rings, or threaded rod hangers must be suspended from I-beams, H-beams, or similar structural steel members. It accommodates conduit hangers in the size range 0 through 5. The zinc-plated steel construction makes it appropriate for dry and moderately exposed indoor environments. This clamp installs at the bottom flange of a structural beam, allowing quick positioning and secure locking without welding or drilling into the beam.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts beam flanges up to 3\/4 inches wide\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch-16 tapped hole on bottom for threaded rod or hanger attachment\u003c\/li\u003e\n  \u003cli\u003eCase-hardened set screw tapped at an angle for secure flange grip\u003c\/li\u003e\n  \u003cli\u003e200-pound maximum load capacity with 60 in-lbf torque rating\u003c\/li\u003e\n  \u003cli\u003e11-gauge steel construction with zinc-plated finish\u003c\/li\u003e\n  \u003cli\u003eCompatible with conduit hangers sizes 0 to 5, bridle rings, and threaded rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with conduit hangers sizes 0 through 5, bridle rings, and threaded rod applications on structural steel beams with flanges up to 3\/4 inches wide.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed electrician following applicable NEC requirements for conduit support and hanger spacing. De-energize any nearby circuits before working in the area. Position the clamp on the beam flange, then tighten the set screw to the rated torque using the appropriate hex key — do not exceed the 60 in-lbf torque rating. Verify the rod or hanger connection at the tapped hole is fully threaded and secure before loading.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Beam Clamp (Flange Clamp)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGauge\u003c\/strong\u003e: 11\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Zinc-Plated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Flange Width\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTapped Hole Size\u003c\/strong\u003e: 3\/8 inch-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSet Screw Size\u003c\/strong\u003e: 5\/16 inch-18 x 1-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Load Capacity\u003c\/strong\u003e: 200 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTorque Rating\u003c\/strong\u003e: 60 in-lbf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e: 2.00 x 1.20 x 2.20 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MINERALLAC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 602\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MINERALLAC","offers":[{"title":"Default Title","offer_id":51267870785842,"sku":"602","price":998.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308910016.jpg?v=1780692837","url":"https:\/\/voomisupply.com\/products\/minerallac-602-beam-clamp-3-4-in-flange-3-8-in-tapped-zinc-plated","provider":"Voomi Supply","version":"1.0","type":"link"}