{"product_id":"milwaukee-tool-48-20-8054-sds-plus-drill-bit-11mm","title":"Milwaukee Tool 48-20-8054 Sds-plus Drill Bit 11mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MILWAUKEE TOOL 48-20-8054 is a carbide-tipped rotary hammer drill bit designed for use with SDS-Plus rotary hammers. It features an 11mm diameter with a spear cutting shape, making it well suited for drilling into concrete, masonry, and similar hard materials. The usable flute length is 110mm (approximately 4.33 inches) and the overall length is 160mm (approximately 6.3 inches). The carbide tip is paired with a high-speed steel body, giving the bit durability under the repeated impact cycles of rotary hammer operation. Licensed tradespeople and experienced DIYers working with SDS-Plus hammer drills will find this a direct, task-specific bit for anchor and fastener prep work.\u003c\/p\u003e\u003cp\u003eThis bit is intended for use in SDS-Plus rotary hammers on residential and light commercial jobsites. Typical applications include drilling holes for concrete anchors, masonry fasteners, and similar penetrations in poured concrete, block, or brick. The spear cutting geometry is optimized for clean, accurate entry and efficient chip removal during hammer drilling. At 11mm diameter it suits anchor sizes commonly specified in structural and mechanical trade work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e11mm diameter carbide-tipped spear cutting edge for accurate entry into concrete and masonry\u003c\/li\u003e\n\u003cli\u003eSDS-Plus shank provides positive drive engagement and easy bit changes without a chuck key\u003c\/li\u003e\n\u003cli\u003e110mm usable flute length (approximately 4.33 inches) for deep anchor-hole applications\u003c\/li\u003e\n\u003cli\u003eCarbide tip over high-speed steel body balances wear resistance and impact toughness\u003c\/li\u003e\n\u003cli\u003eCompact 160mm overall length (approximately 6.3 inches) suits standard rotary hammer configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with SDS-Plus rotary hammers. The SDS-Plus shank is an industry-standard interface compatible with SDS-Plus chuck systems across major rotary hammer platforms.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and drilling should be performed by a qualified tradesperson familiar with rotary hammer operation and applicable jobsite safety requirements. Always confirm the hammer is powered off and the bit is fully seated in the SDS-Plus chuck before beginning work. Eye and hearing protection are required when operating rotary hammers in concrete or masonry. Do not use this bit in a standard drill chuck; the SDS-Plus shank requires a dedicated SDS-Plus or SDS-Plus-compatible rotary hammer chuck.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 11mm (approximately 0.43 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS-Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 11mm (approximately 0.43 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Shape\u003c\/strong\u003e: Spear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsable Flute Length\u003c\/strong\u003e: 110mm (approximately 4.33 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 160mm (approximately 6.3 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: Carbide-Tipped High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27111543\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MILWAUKEE TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 48-20-8054\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":51715813048626,"sku":"48-20-8054","price":15.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8b322ff1f91598877375ee27142a6538.jpg?v=1788518642","url":"https:\/\/voomisupply.com\/products\/milwaukee-tool-48-20-8054-sds-plus-drill-bit-11mm","provider":"Voomi Supply","version":"1.0","type":"link"}