{"product_id":"milwaukee-tool-48-13-5003-countersink-set-3-piece-hss","title":"Milwaukee Tool 48-13-5003 Countersink Set 3 Piece Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MILWAUKEE TOOL 48-13-5003 is a 3-piece high speed steel countersink set designed for countersinking and drilling operations in wood, plastic, and soft metals. The set covers screw sizes No. 6, No. 8, and No. 10, with head diameters ranging from 1\/8 inch to 1\/4 inch. Each countersink features a single flute, right-hand cutting direction, and a 1\/4-inch hex quick-change shank for fast bit swaps in compatible drivers and chucks. Overall lengths range from 3.75 inches to 4.38 inches. The uncoated HSS construction handles general-purpose countersinking without the added cost of specialty coatings. Carpenters, finish contractors, and trade professionals working with fasteners install this set.\u003c\/p\u003e\n\u003cp\u003eThis countersink set is suited for residential and light commercial applications where clean, flush fastener seating is required. The quick-change hex shank attachment method allows rapid swapping between bits on the job without a chuck key. The three-piece contents cover the most common wood screw sizes, making it a practical addition to a fastener prep kit for cabinetry, trim, framing connectors, and general fixture installation. The set is packaged as a single unit with a minimum order quantity of one.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3-piece set includes countersinks for No. 6, No. 8, and No. 10 screws\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction for durability in general-purpose countersinking and drilling\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch hex quick-change shank compatible with standard hex chuck systems\u003c\/li\u003e\n  \u003cli\u003eSingle-flute design for clean, controlled material removal\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction for use with standard drill drivers\u003c\/li\u003e\n  \u003cli\u003eUncoated finish — no additional coating buildup affecting bit diameter tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 1\/4-inch hex quick-change compatible drill drivers and chucks for countersinking and drilling applications on No. 6, No. 8, and No. 10 fasteners.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by carpenters, finish contractors, and general tradespeople using a standard drill driver or drill press equipped with a 1\/4-inch hex chuck or quick-change adapter. Ensure the workpiece is secured before operation to prevent movement during countersinking. Inspect each bit for wear before use and replace if cutting edges show chipping or deformation. Follow applicable workplace safety guidelines when operating rotary cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Pieces\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContents\u003c\/strong\u003e: No. 6, No. 8, No. 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Head Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Head Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Diameter\u003c\/strong\u003e: 3\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Hex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAttachment Method\u003c\/strong\u003e: Quick-Change\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Overall Length\u003c\/strong\u003e: 3.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Overall Length\u003c\/strong\u003e: 4.38 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountersink Application\u003c\/strong\u003e: Countersinking, Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.235 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MILWAUKEE TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 48-13-5003\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":51722112991538,"sku":"48-13-5003","price":45.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5ea0ae092c51de1196a8f7d0bc49b3ec.jpg?v=1788585948","url":"https:\/\/voomisupply.com\/products\/milwaukee-tool-48-13-5003-countersink-set-3-piece-hss","provider":"Voomi Supply","version":"1.0","type":"link"}