{"product_id":"midland-industries-948173l-brass-ball-valve-3-4-inch-locking-handle","title":"Midland Industries 948173L Brass Ball Valve 3\/4 Inch Locking Handle","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 948173L is a 3\/4-inch brass ball valve with a locking handle, designed for manual shutoff and flow control in plumbing, HVAC, and industrial piping systems. The valve connects via male pipe thread (MPT) inlet to female pipe thread (FPT) outlet and carries a working pressure rating of 600 psi WOG (Water, Oil, Gas). Constructed with a brass body, brass ball, and brass stem, it uses PTFE seat, PTFE seal, and PTFE packing for reliable shutoff across a wide temperature range. The locking handle prevents accidental operation, making it well suited for installations where inadvertent valve actuation is a safety concern.\u003c\/p\u003e\u003cp\u003eThis valve is appropriate for residential and light commercial applications including potable water lines, hydronic heating systems, gas distribution piping, and compressed air service within its rated parameters. The 3\/4-14 thread size fits standard NPT piping. The MPT x FPT configuration allows inline installation without additional adapters in most piping scenarios. Plumbers and pipefitters are the primary trade installers, though HVAC technicians frequently use this type of valve for zone isolation and equipment shutoff in hydronic systems.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLocking handle prevents accidental open or close during service or in high-traffic areas\u003c\/li\u003e\n\u003cli\u003e600 psi WOG pressure rating supports water, oil, and gas service applications\u003c\/li\u003e\n\u003cli\u003eBrass body, brass ball, and brass stem construction for corrosion resistance in wet service\u003c\/li\u003e\n\u003cli\u003ePTFE seat, seal, and packing for low-torque operation and tight shutoff\u003c\/li\u003e\n\u003cli\u003eMPT x FPT end connections in 3\/4-14 NPT thread for direct inline installation\u003c\/li\u003e\n\u003cli\u003eRated from -20 to 300 degrees F, covering most residential and commercial mechanical system conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-install ball valve for 3\/4-inch NPT piping systems in plumbing, HVAC hydronic, gas, and industrial fluid service applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes, the International Plumbing Code (IPC), or the International Fuel Gas Code (IFGC) for gas service. Shut off and depressurize the supply line and drain the system before removing an existing valve or making new connections. Apply appropriate thread sealant to male threads before assembly and tighten to hand-snug plus wrench-firm  -  do not overtighten brass fittings, as this can crack the body. Verify the locking handle is engaged after commissioning to confirm desired valve position is secured.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Size\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: MPT x FPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/4-14 NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 600 psi WOG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -20 to 300 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat Material\u003c\/strong\u003e: PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Material\u003c\/strong\u003e: PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacking Material\u003c\/strong\u003e: PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim\u003c\/strong\u003e: Brass Impacted Nut \/ Steel Stem Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type\u003c\/strong\u003e: Locking Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet to Outlet Length\u003c\/strong\u003e: 2.618 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop to Inlet Center\u003c\/strong\u003e: 2.106 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.45 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 1.45 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Content\u003c\/strong\u003e: Contains Lead\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 948173L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67949296582962,"sku":"948173L","price":30.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/afe957e629384bcefe5688c2e4dd3c2a_1bec06f0-9fd4-43c7-b86f-a6002de43072.jpg?v=1791687674","url":"https:\/\/voomisupply.com\/products\/midland-industries-948173l-brass-ball-valve-3-4-inch-locking-handle","provider":"Voomi Supply","version":"1.0","type":"link"}