{"product_id":"midland-industries-73203mb5-polyethylene-tubing-500-ft","title":"Midland Industries 73203MB5 Polyethylene Tubing 500 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 73203MB5 is a black LLDPE polyethylene tubing supplied in a 500-foot roll. It measures 4 mm inside diameter and 6 mm outside diameter with a 1 mm wall thickness. Rated for working pressures up to 150 psi and a vacuum rating of 28 inHg, it carries a 3:1 safety factor. The temperature range spans -50 to 140 degrees F. Shore A hardness is 98 and Shore D hardness is 45D. The minimum bend radius is 31.8 mm. Plumbers, HVAC technicians, and instrumentation professionals install this tubing in fluid-transfer and pneumatic line applications where chemical resistance and flexibility are required.\u003c\/p\u003e\u003cp\u003eThis tubing is suited for light-duty fluid transfer, pneumatic control lines, and instrumentation runs in both residential and light commercial settings. Its chemical resistance makes it appropriate for applications where mild corrosive fluids or cleaning agents may be present. The 500-foot continuous roll reduces the number of splices needed on longer runs, making it practical for new installations and retrofit work alike.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLLDPE construction provides chemical resistance and flexibility over a wide temperature range\u003c\/li\u003e\n\u003cli\u003eWorking pressure rated to 150 psi with a 3:1 safety factor\u003c\/li\u003e\n\u003cli\u003eVacuum rating of 28 inHg suitable for suction-side line applications\u003c\/li\u003e\n\u003cli\u003eTemperature range of -50 to 140 degrees F for use in varied environments\u003c\/li\u003e\n\u003cli\u003e31.8 mm minimum bend radius allows routing through tight spaces without kinking\u003c\/li\u003e\n\u003cli\u003eCompatible with barb-type, push-to-connect, and compression style fittings\u003c\/li\u003e\n\u003cli\u003e500-foot roll minimizes joints on extended runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with barb-type, push-to-connect, or compression style fittings sized for 4 mm ID and 6 mm OD polyethylene tubing.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed plumber, HVAC technician, or instrumentation technician should install this tubing according to applicable local codes. Depressurize and isolate any system before cutting or connecting tubing. Use a clean, square cut to ensure proper seating in push-to-connect or compression fittings. Avoid bending tighter than the stated minimum bend radius to prevent flow restriction or tubing damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: LLDPE (Linear Low-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness\u003c\/strong\u003e: 1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 500 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Pressure\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum Rating\u003c\/strong\u003e: 28 inHg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Factor\u003c\/strong\u003e: 3:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -50 to 140 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius\u003c\/strong\u003e: 31.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A Hardness\u003c\/strong\u003e: 98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore D Hardness\u003c\/strong\u003e: 45D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fitting Types\u003c\/strong\u003e: Barb-type, push-to-connect, compression\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 73203MB5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67952143958322,"sku":"73203MB5","price":86.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/384027d26f548bd0348cdbef13517d77_a35cb486-d357-4a0c-a339-e51bc685a109.jpg?v=1791748174","url":"https:\/\/voomisupply.com\/products\/midland-industries-73203mb5-polyethylene-tubing-500-ft","provider":"Voomi Supply","version":"1.0","type":"link"}