{"product_id":"midland-industries-704059-060604-flare-reducing-tee-brass","title":"Midland Industries 704059-060604 Flare Reducing Tee Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 704059-060604 is a lead-free brass SAE 45-degree flare reducing branch union tee designed for use in refrigeration, HVAC, and fuel-gas tubing systems. It provides a three-way branch connection with two 3\/8-inch male flared ends and one 1\/4-inch male flared end, allowing a single line to split into two circuits or to tie in a smaller-diameter branch. The fitting is machined from lead-free brass and is rated for service between -40 and 250 degrees F, making it suitable for a broad range of fluid and gas applications. Licensed plumbers, HVAC technicians, and refrigeration mechanics are the typical installers.\u003c\/p\u003e\u003cp\u003eThis fitting is used wherever a 45-degree SAE flare tee connection is required in residential or light commercial systems. Typical applications include refrigerant line sets, LP and natural gas supply piping, compressed air distribution, and hydraulic or fuel lines where a reducing branch is needed. The 3\/8 x 3\/8 x 1\/4 inch configuration suits installations that transition from a main run to a smaller branch line without the need for additional reducers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLead-free brass construction meets current potable and fuel-gas material requirements\u003c\/li\u003e\n\u003cli\u003eSAE 45-degree flare connections on all three ports for a pressure-tight, tool-made seal\u003c\/li\u003e\n\u003cli\u003eReducing branch port (1\/4 inch) allows direct transition from a 3\/8-inch main run\u003c\/li\u003e\n\u003cli\u003eTemperature rating of -40 to 250 degrees F covers most HVAC, refrigeration, and gas-piping service conditions\u003c\/li\u003e\n\u003cli\u003eCompatible with aluminum, brass, copper, or steel tubing\u003c\/li\u003e\n\u003cli\u003eCompact profile at 2 inches long and 1.15 inches wide for use in tight spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with aluminum, brass, copper, or steel tubing with SAE 45-degree male flare ends. Suitable for systems requiring a 3\/8-inch x 3\/8-inch x 1\/4-inch reducing branch union tee configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician, refrigeration mechanic, or plumber in accordance with applicable local codes and IFGC or IPC requirements. Shut off and depressurize the system completely before disassembling or making any flare connections. Use a calibrated flaring tool to form SAE 45-degree flares on all tubing ends, and inspect each flare for cracks or irregularities before assembly. Do not over-torque flare nuts, as this can distort the sealing surface and cause leaks.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 3\/8 inches, Male Flared\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 3\/8 inches, Male Flared\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 3\u003c\/strong\u003e: 1\/4 inches, Male Flared\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlare Type\u003c\/strong\u003e: SAE 45-degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Lead-Free Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -40 to 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tubing Materials\u003c\/strong\u003e: Aluminum, Brass, Copper, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.55 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 704059-060604\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67949582582066,"sku":"704059-060604","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/acfe7cda4967bca94aa96068a65522e8_972dacb0-5b15-4688-9e62-db854f6a55d3.jpg?v=1791695475","url":"https:\/\/voomisupply.com\/products\/midland-industries-704059-060604-flare-reducing-tee-brass","provider":"Voomi Supply","version":"1.0","type":"link"}