{"product_id":"midland-industries-65349-reducing-tee-1-1-4-fpt-iron-150-lb","title":"Midland Industries 65349 Reducing Tee 1-1\/4 Fpt Iron 150 Lb","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 65349 is a malleable iron reducing tee rated at 150 lb pressure class, designed for threaded pipe assemblies in gas, air, and general industrial piping systems. It features three female pipe thread (FPT) ports sized at 1-1\/4 inches, 1 inch, and 1\/2 inch, allowing a main run to be reduced or branched in a single fitting. The 65349 conforms to ANSI B16.3 dimensional standards and is rated for service from -20 degrees F to 350 degrees F. The black iron finish makes it a standard choice for natural gas and propane distribution lines. Licensed plumbers and pipefitters install this fitting in both residential and light commercial applications.\u003c\/p\u003e\u003cp\u003eThis reducing tee is suited for low-pressure gas distribution, compressed air lines, and general fluid conveyance where NPT threaded connections are specified. Center-to-end dimensions of 1.26 inches, 1.34 inches, and 1.53 inches allow accurate layout in tight mechanical spaces. The 150 lb pressure class rating covers the majority of residential and light commercial service conditions. Its malleable iron construction provides greater ductility than standard cast iron, making it less susceptible to cracking under mechanical stress or vibration typical in installed piping systems.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThree-port reducing configuration: 1-1\/4 in FPT x 1 in FPT x 1\/2 in FPT\u003c\/li\u003e\n\u003cli\u003e150 lb pressure class per ANSI B16.3 dimensional standard\u003c\/li\u003e\n\u003cli\u003eMalleable iron construction for improved ductility over standard cast iron\u003c\/li\u003e\n\u003cli\u003eBlack finish suitable for natural gas and propane piping\u003c\/li\u003e\n\u003cli\u003eService temperature range: -20 degrees F to 350 degrees F\u003c\/li\u003e\n\u003cli\u003eCenter-to-end dimensions: 1.26 in, 1.34 in, and 1.53 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for 150 lb malleable iron threaded piping systems conforming to ANSI B16.3, compatible with standard NPT threaded pipe and fittings of matching sizes.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable codes such as the International Fuel Gas Code (IFGC) or International Plumbing Code (IPC). Shut off and depressurize the line completely before disassembling or installing any threaded fitting. Apply a listed thread sealant or PTFE tape rated for the intended service medium to all male threads before assembly. Do not over-tighten; use a pipe wrench sized appropriately for the fitting to achieve a leak-free joint without cracking the fitting body.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 1-1\/4 inches FPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 1 inch FPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 3\u003c\/strong\u003e: 1\/2 inch FPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 1-1\/4-11-1\/2 x 1-11-1\/2 x 1\/2-14 NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 150 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional Standard\u003c\/strong\u003e: ANSI B16.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: -20 degrees F to 350 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to End (Port 1)\u003c\/strong\u003e: 1.26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to End (Port 2)\u003c\/strong\u003e: 1.34 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to End (Port 3)\u003c\/strong\u003e: 1.53 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 2.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 2.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.75 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 65349\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67951557607730,"sku":"65349","price":26.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bdd3c3c36391c645b35bd15f983bce5f_4e2fc91a-a641-4f21-b6fd-242840314869.jpg?v=1791730008","url":"https:\/\/voomisupply.com\/products\/midland-industries-65349-reducing-tee-1-1-4-fpt-iron-150-lb","provider":"Voomi Supply","version":"1.0","type":"link"}