{"product_id":"midland-industries-64396-1-1-4-in-fpt-galvanized-iron-cross-fitting","title":"Midland Industries 64396 1-1\/4 in Fpt Galvanized Iron Cross Fitting","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 64396 is a four-way malleable iron cross fitting with a galvanized finish, designed for threaded pipe assemblies in plumbing, gas distribution, and mechanical piping systems. All four ports are 1-1\/4 in female pipe thread (FPT) with a 1-1\/4-11-1\/2 thread form. The fitting is rated to 150 psi and handles temperatures from -20 degrees F to 350 degrees F, making it suitable for a wide range of liquid and low-pressure gas applications. The galvanized coating provides corrosion resistance for installations in wet or exposed environments. Licensed plumbers and pipefitters are the primary installers of this fitting class.\u003c\/p\u003e\u003cp\u003eThis cross fitting is used in residential and commercial piping systems where a single run must branch in two perpendicular directions simultaneously. Typical applications include water supply distribution headers, compressed air lines, and low-pressure gas manifold assemblies. The 1-1\/4 in FPT connections accept standard Schedule 40 threaded pipe, making this fitting compatible with common black iron and galvanized pipe runs found in mechanical rooms, boiler rooms, and industrial service installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFour-way cross configuration with 1-1\/4 in FPT ports on all connections\u003c\/li\u003e\n\u003cli\u003eMalleable iron construction with galvanized finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e150 psi pressure rating suitable for water, air, and low-pressure gas service\u003c\/li\u003e\n\u003cli\u003eTemperature range of -20 degrees F to 350 degrees F\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B16.3 dimension standards for malleable iron threaded fittings\u003c\/li\u003e\n\u003cli\u003e1-3\/4 in center-to-end dimension for accurate layout and spacing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard 1-1\/4 in Schedule 40 threaded pipe in 150-pound class galvanized malleable iron piping systems conforming to ANSI B16.3.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and the International Plumbing Code (IPC) or International Fuel Gas Code (IFGC) where relevant. Shut off and depressurize the system fully before removing or installing any threaded fitting. Apply an appropriate thread sealant or PTFE tape to male threads before engagement, and tighten to a firm, leak-free connection using a pipe wrench. Do not over-torque malleable iron fittings, as the material is not as ductile as forged steel and can crack under excessive force.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size (All Ports)\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type (All Ports)\u003c\/strong\u003e: FPT (Female Pipe Thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 1-1\/4-11-1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -20 to 350 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable Iron, Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension Standard\u003c\/strong\u003e: ANSI B16.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 2.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3.55 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to End\u003c\/strong\u003e: 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.59 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 64396\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67951466676530,"sku":"64396","price":47.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/054656f91c6663d538b740275d389e75.jpg?v=1791727339","url":"https:\/\/voomisupply.com\/products\/midland-industries-64396-1-1-4-in-fpt-galvanized-iron-cross-fitting","provider":"Voomi Supply","version":"1.0","type":"link"}