{"product_id":"midland-industries-64314-bulkhead-reducing-tee-150-lb-galvanized","title":"Midland Industries 64314 Bulkhead Reducing Tee 150 Lb Galvanized","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 64314 is a malleable iron galvanized bulkhead reducing tee rated at 150 lb pressure class. It features three female pipe thread (FPT) connections: two at 1-1\/4 inches and one reduced center port at 1\/2 inch, threaded to ANSI B16.3 dimensional standards. The 1-1\/4 inch ports use an 11-1\/2 thread pitch and the 1\/2 inch port uses a 14 thread pitch. The galvanized finish provides corrosion resistance for use in wet or exposed environments. This fitting is installed by licensed plumbers and pipefitters working on gas, water, and general piping systems in both residential and light commercial applications.\u003c\/p\u003e\n\u003cp\u003eThis bulkhead reducing tee is suited for installations where a branch takeoff at a reduced diameter is required from a main run. It is commonly used in galvanized pipe assemblies for gas distribution, water supply, and mechanical systems. The reducing center port allows a 1\/2 inch branch line to be tapped off a 1-1\/4 inch main line without additional bushings. It is appropriate for service within a temperature range of -20 to 350 degrees F, making it compatible with a wide range of fluid and gas piping conditions in both indoor and outdoor mechanical rooms.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eThree FPT connections: 1-1\/4 inches run ports and 1\/2 inch reduced branch port\u003c\/li\u003e\n  \u003cli\u003eMalleable iron construction meets ANSI B16.3 dimensional standards\u003c\/li\u003e\n  \u003cli\u003eGalvanized finish for corrosion resistance in wet or exposed installations\u003c\/li\u003e\n  \u003cli\u003e150 lb pressure class rated for general piping service\u003c\/li\u003e\n  \u003cli\u003eTemperature rating of -20 to 350 degrees F\u003c\/li\u003e\n  \u003cli\u003eCompact profile: 3.4 inches length, 2.7 inches width, 2.15 inches height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement fitting for galvanized 150 lb malleable iron pipe systems using 1-1\/4 inch FPT and 1\/2 inch FPT threaded connections conforming to ANSI B16.3.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable local plumbing and mechanical codes. Shut off and depressurize the pipe system completely before removing or installing any fittings. Apply an appropriate thread sealant or PTFE tape to all male threads before assembly, and tighten to hand-tight plus the appropriate number of turns per trade practice for the pipe size. Do not over-torque malleable iron fittings, as this can crack the casting.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection 1 Size\u003c\/strong\u003e: 1-1\/4 inches FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection 2 Size\u003c\/strong\u003e: 1\/2 inch FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection 3 Size\u003c\/strong\u003e: 1-1\/4 inches FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: 1-1\/4-11-1\/2 x 1\/2-14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 150 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Galvanized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimension Standard\u003c\/strong\u003e: ANSI B16.3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -20 to 350 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 3.4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.7 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 2.15 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.490 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 64314\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67949709820210,"sku":"64314","price":36.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/03307e8d3b5ce8adfaa33428ee96d916_05a58fb9-cb2c-4c52-ac6a-8ef60cae0353.jpg?v=1791698760","url":"https:\/\/voomisupply.com\/products\/midland-industries-64314-bulkhead-reducing-tee-150-lb-galvanized","provider":"Voomi Supply","version":"1.0","type":"link"}