{"product_id":"midland-industries-64150-90-deg-reducing-elbow-3x2-fpt-iron","title":"Midland Industries 64150 90 Deg Reducing Elbow 3x2 Fpt Iron","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 64150 is a 90-degree reducing elbow fitting manufactured from malleable iron with a galvanized finish. It connects a 3-inch female pipe thread (FPT) inlet to a 2-inch FPT outlet, allowing a direction change and a reduction in pipe diameter within a single fitting. Rated at 150 lb pressure class and conforming to ANSI B16.3 dimensional standards, this elbow is built for threaded iron pipe systems in industrial and commercial plumbing and gas distribution applications. It weighs 1.4 pounds and carries a temperature range of -20 to 350 degrees F. Licensed plumbers and pipefitters are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for galvanized threaded pipe systems in commercial and industrial settings where both a directional change and a pipe size reduction are needed at the same point. Typical applications include water distribution, gas piping, fire protection, and compressed air lines that use Schedule 40 or Schedule 80 malleable iron fittings. The galvanized coating provides corrosion resistance for wet or humid environments. Thread dimensions follow the 3-8 x 2-11-1\/2 thread specification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree elbow with built-in reduction from 3 inches to 2 inches in one fitting\u003c\/li\u003e\n  \u003cli\u003eFemale pipe thread (FPT) on both ends for standard threaded iron pipe assembly\u003c\/li\u003e\n  \u003cli\u003eMalleable iron construction rated to 150 lb pressure class per ANSI B16.3\u003c\/li\u003e\n  \u003cli\u003eGalvanized finish for corrosion resistance in wet or outdoor environments\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -20 to 350 degrees F\u003c\/li\u003e\n  \u003cli\u003eThread dimensions: 3-8 x 2-11-1\/2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for galvanized 150 lb malleable iron threaded pipe systems using 3-inch and 2-inch Schedule 40 or Schedule 80 pipe.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable codes such as the IPC or IFGC. Apply an approved pipe thread sealant or PTFE tape to all male threads before assembly. Hand-tighten the fitting first, then use a pipe wrench to achieve a leak-free joint without over-torquing the threads. Shut off and depressurize the line completely before removing any existing fitting or making connections.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 3 inches FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 2 inches FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Female Pipe Thread (FPT) both ends\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 150 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimension Standard\u003c\/strong\u003e: ANSI B16.3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Dimensions\u003c\/strong\u003e: 3-8 x 2-11-1\/2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -20 to 350 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Galvanized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 64150\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67950100611378,"sku":"64150","price":145.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/36730adde7b9e469a6a37c21060889bf_ff833af6-0274-448b-8ff7-40f0e7b71844.jpg?v=1791707153","url":"https:\/\/voomisupply.com\/products\/midland-industries-64150-90-deg-reducing-elbow-3x2-fpt-iron","provider":"Voomi Supply","version":"1.0","type":"link"}