{"product_id":"midland-industries-59190smls-pipe-nipple-2-1-2-in-sch-80","title":"Midland Industries 59190SMLS Pipe Nipple 2-1\/2 in Sch 80","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 59190SMLS is a seamless Schedule 80 black steel pipe nipple used to create threaded connections in high-pressure piping systems. It measures 9 inches in length with a 2-1\/2 inch diameter and carries male pipe thread (MPT) connections on both ends. Wall thickness is 0.276 inches, and the thread length is 1.57 inches per end, conforming to ANSI B1.20.1 dimensional standards. Rated at 2,500 psi and a 300 lb pressure class, this nipple is suited for demanding gas, steam, oil, or industrial fluid applications. Licensed plumbers, pipefitters, and mechanical contractors are the typical installers.\u003c\/p\u003e\u003cp\u003eThis nipple is appropriate for use in commercial and industrial piping runs where SCH 80 wall strength is required. It fits into systems that demand higher pressure ratings than standard Schedule 40 components. Common applications include black iron gas distribution, compressed air lines, and industrial fluid transfer. The operating temperature range is -200 to 150 degrees F, making it usable across a wide range of service conditions. Its seamless construction eliminates weld seams, reducing potential failure points in pressurized service.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSeamless construction for uniform wall integrity under pressure\u003c\/li\u003e\n\u003cli\u003eSCH 80 schedule rating with 0.276 inch wall thickness for high-pressure service\u003c\/li\u003e\n\u003cli\u003eRated to 2,500 psi at a 300 lb pressure class\u003c\/li\u003e\n\u003cli\u003eConforms to ANSI B1.20.1 thread dimensional standard\u003c\/li\u003e\n\u003cli\u003eWide temperature range: -200 to 150 degrees F\u003c\/li\u003e\n\u003cli\u003eBlack steel finish suitable for gas and industrial fluid systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-install fitting for Schedule 80 black steel threaded piping systems using 2-1\/2 inch MPT connections.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable mechanical and plumbing codes, including IPC and IFGC requirements. Shut down and fully depressurize the piping system before removing or installing any threaded fitting. Apply an approved thread sealant or PTFE tape to male threads before assembly. Do not over-tighten; follow standard trade practice for the pipe size and service type to avoid thread damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: MPT x MPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 2-1\/2-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 1.57 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness\u003c\/strong\u003e: 0.276 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule Rating\u003c\/strong\u003e: SCH 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 300 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 2,500 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -200 to 150 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension Standard\u003c\/strong\u003e: ANSI B1.20.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.74 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 59190SMLS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67949954040114,"sku":"59190SMLS","price":86.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/aeb6bd0653190e92272b38ada6845053.jpg?v=1791704775","url":"https:\/\/voomisupply.com\/products\/midland-industries-59190smls-pipe-nipple-2-1-2-in-sch-80","provider":"Voomi Supply","version":"1.0","type":"link"}