{"product_id":"midland-industries-44306lf-bronze-pipe-reducing-tee","title":"Midland Industries 44306LF Bronze Pipe Reducing Tee","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 44306LF is a lead-free bronze pipe reducing tee designed for threaded plumbing and water distribution systems. It provides two run connections at 1-1\/4 inches FPT and a reduced branch connection at 1 inch FPT, allowing a single fitting to handle a flow reduction without additional adapters. Rated at 125 lb pressure class, this fitting meets AWWA C800, ASME B16.15, ASME B1.20.1, WW-P-460C, and MSS-SP-106 dimensional and material standards. Its lead-free bronze construction makes it suitable for potable water applications where lead-free compliance is required by code. Licensed plumbers and pipefitters are the typical installers for this type of fitting.\u003c\/p\u003e\n\u003cp\u003eThis reducing tee is well suited for residential and light commercial potable water supply lines, irrigation manifolds, and mechanical room branch piping where a run-to-branch size reduction is needed. The 1-1\/4-11-1\/2 x 1-11-1\/2 thread specification follows ASME B1.20.1 National Pipe Thread (NPT) standards, ensuring consistent thread engagement with standard NPT-threaded pipe and components. It is commonly installed in copper, brass, or other compatible threaded piping systems operating within the 125 lb pressure rating.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLead-free bronze construction meets potable water safety requirements\u003c\/li\u003e\n  \u003cli\u003e125 lb pressure class rating suitable for standard water service pressures\u003c\/li\u003e\n  \u003cli\u003eThree female pipe thread (FPT) connections  -  1-1\/4 in run x 1-1\/4 in run x 1 in branch\u003c\/li\u003e\n  \u003cli\u003eMeets AWWA C800, ASME B16.15, ASME B1.20.1, WW-P-460C, and MSS-SP-106 standards\u003c\/li\u003e\n  \u003cli\u003eCompact footprint at 2.9 inches wide x 2.6 inches length x 2.1 inches height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for standard NPT-threaded plumbing systems rated at 125 lb pressure class or lower, including potable water supply, distribution, and irrigation applications requiring lead-free bronze fittings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and depressurize the line completely before cutting or threading into existing pipe. Apply an approved thread sealant or PTFE tape to the male threads before assembly, and tighten to the manufacturer-recommended engagement for NPT connections  -  do not over-torque, as bronze fittings can crack under excessive force. Verify the system is fully pressurized and leak-free before returning to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 1-1\/4 inches FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 1-1\/4 inches FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 3\u003c\/strong\u003e: 1 inch FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 1-1\/4-11-1\/2 x 1-11-1\/2 NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 125 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Lead-Free Bronze\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 2.1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 2.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.065 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimension Standards\u003c\/strong\u003e: AWWA C800, ASME B16.15, ASME B1.20.1, WW-P-460C, MSS-SP-106\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 44306LF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67949335871794,"sku":"44306LF","price":69.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4f5cc3481c7504e4f3896e7f390ea37b_63320ea2-6a9b-480d-9b96-dce3143c6d20.jpg?v=1791689246","url":"https:\/\/voomisupply.com\/products\/midland-industries-44306lf-bronze-pipe-reducing-tee","provider":"Voomi Supply","version":"1.0","type":"link"}