{"product_id":"midland-industries-40152-brass-pipe-nipple-1-1-2-in-mpt-9-in","title":"Midland Industries 40152 Brass Pipe Nipple 1-1\/2 in Mpt 9 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 40152 is a seamless lead-free red brass pipe nipple designed for use in plumbing, gas, and fluid-handling systems where a reliable threaded connection is required. It measures 9 inches in length with a 1-1\/2-inch male pipe thread (MPT) on both ends, following ANSI B1.20.1 thread standards. The seamless construction and Schedule 40 wall thickness of 0.15 inches provide consistent material integrity throughout the fitting. Rated at 630 psi at 100 degrees F with a service range of -20 to 400 degrees F, this nipple is suited for high-pressure and elevated-temperature applications. Licensed plumbers and pipefitters are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis nipple is used in residential and commercial plumbing systems, hydronic heating lines, steam service, and industrial fluid distribution where brass fittings are specified. Its lead-free red brass construction makes it appropriate for potable water systems where regulatory compliance with lead-free standards is required. The 1-1\/2-inch MPT x MPT configuration is a common size in commercial supply lines, boiler piping, and mechanical room distribution manifolds. The 9-inch length suits close-coupled valve and fitting arrangements where standard hex nipples are too short.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSeamless lead-free red brass construction for consistent wall integrity and compliance with potable water requirements\u003c\/li\u003e\n  \u003cli\u003eSchedule 40 wall thickness of 0.15 inches for high-pressure service\u003c\/li\u003e\n  \u003cli\u003eRated at 630 psi at 100 degrees F with a 125 lb pressure class\u003c\/li\u003e\n  \u003cli\u003eService temperature range of -20 to 400 degrees F suits heating, steam, and chilled water applications\u003c\/li\u003e\n  \u003cli\u003e1-1\/2-11-1\/2 thread per ANSI B1.20.1, WW-N-351, and MS 51846 dimension standards\u003c\/li\u003e\n  \u003cli\u003e1.6-inch inside diameter and 1.9-inch outside diameter for accurate pipe sizing calculations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for 1-1\/2-inch Schedule 40 threaded piping systems using standard NPT connections per ANSI B1.20.1.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber or pipefitter. Shut off and depressurize the system before disassembling any existing fittings. Apply a compatible thread sealant or PTFE tape to the male threads before assembly; do not overtighten, as brass threads can deform under excessive torque. Work must comply with local plumbing codes and applicable provisions of the International Plumbing Code (IPC).\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: MPT x MPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall Thickness\u003c\/strong\u003e: 0.15 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 1-1\/2-11-1\/2 NPT per ANSI B1.20.1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule Rating\u003c\/strong\u003e: SCH 40\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 125 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Pressure\u003c\/strong\u003e: 630 psi at 100 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: -20 to 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Lead-Free Red Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.21 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimension Standards\u003c\/strong\u003e: ANSI B1.20.1, WW-N-351, MS 51846\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 40152\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67952089301298,"sku":"40152","price":205.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4948f845678679b500bd6a9a27da586d.jpg?v=1791746373","url":"https:\/\/voomisupply.com\/products\/midland-industries-40152-brass-pipe-nipple-1-1-2-in-mpt-9-in","provider":"Voomi Supply","version":"1.0","type":"link"}