{"product_id":"midland-industries-262rx14x10-reducing-union-brass","title":"Midland Industries 262RX14X10 Reducing Union Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 262RX14X10 is a brass reducing union fitting that joins two different-diameter compression lines in a single inline connection. One end accepts 7\/8 inch compression tubing and the other accepts 5\/8 inch compression tubing, making it the right choice when a line transition is required without stepping down through multiple fittings. The fitting carries a maximum working pressure of 75 psi and is rated for service from -65 degrees F to 250 degrees F. The 1.18 inch hex allows standard wrench engagement during installation. Plumbers, HVAC technicians, and refrigeration mechanics reach for this fitting when a single compact union is needed to connect two different tube sizes.\u003c\/p\u003e\n\u003cp\u003eThis reducing union is suited for residential and light commercial applications where copper, aluminum, or thermoplastic tubing must be joined at a size transition. Common install scenarios include refrigeration line sets, fuel gas distribution using approved flexible tubing, and general fluid-handling runs where space is limited and a low-profile union is preferred. The 1.23 inch center-to-center dimension keeps the fitting compact in tight routing situations. It belongs to the MAF\/USA Brass Fittings compression product line.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/8 inch compression inlet to 5\/8 inch compression outlet in one fitting body\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion in fluid and gas service\u003c\/li\u003e\n  \u003cli\u003eRated to 75 psi working pressure\u003c\/li\u003e\n  \u003cli\u003eWide temperature range: -65 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003eCompatible with copper, aluminum, and thermoplastic tubing types\u003c\/li\u003e\n  \u003cli\u003e1.18 inch hex for secure wrench grip during makeup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with copper, aluminum, and thermoplastic tubing in compression-fitting applications. No specific system model compatibility was provided by the manufacturer for this fitting.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber, HVAC technician, or refrigeration mechanic following applicable local codes and the International Plumbing Code or IFGC as appropriate to the service. Shut off and depressurize the line before disassembly or makeup. Compression fittings do not require thread sealant at the ferrule joint; do not over-tighten, as excess force can deform the ferrule and cause leaks. Verify tube ends are cleanly cut, deburred, and fully seated before torquing the nut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 7\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type 1\u003c\/strong\u003e: Compression\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type 2\u003c\/strong\u003e: Compression\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread\u003c\/strong\u003e: 1-1\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Size\u003c\/strong\u003e: 1.18 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter to Center\u003c\/strong\u003e: 1.23 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 75 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -65 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Tubing\u003c\/strong\u003e: Copper, Aluminum, Thermoplastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.200 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 262RX14X10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67950415937842,"sku":"262RX14X10","price":31.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1af2bcc37275e4de4be12099d0dfbaac_3f2d3af1-dafc-4cd4-9c90-bde935bcdb0b.jpg?v=1791716824","url":"https:\/\/voomisupply.com\/products\/midland-industries-262rx14x10-reducing-union-brass","provider":"Voomi Supply","version":"1.0","type":"link"}