{"product_id":"midland-industries-248x10x12-half-union-adapter-brass","title":"Midland Industries 248X10X12 Half Union Adapter Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 248X10X12 is a brass half union adapter designed to connect SAE 45-degree male flared tubing to a male pipe thread (MPT) port. It bridges a 5\/8-inch flare connection to a 3\/4-inch MPT fitting, making it a practical transition piece in hydraulic and fluid-transfer lines. The fitting is machined from brass and rated to 650 psi, with a temperature range of -65 to 250 degrees F. The 1.06-inch hex allows for standard wrench installation. This adapter is installed by licensed plumbers, hydraulic technicians, and mechanical contractors working on tubing assemblies that require a flare-to-pipe transition.\u003c\/p\u003e\n\u003cp\u003eThis half union adapter is suited for use with aluminum, brass, copper, and steel hydraulic tubing that can be flared. It is commonly installed in hydraulic systems, refrigeration lines, fuel systems, and fluid-handling assemblies where a SAE 45-degree flare on the tubing side must connect to a threaded port or component. The 7\/8-14 male flare thread and 3\/4-14 male pipe thread sizing make it a standard choice for medium-pressure tubing runs in both commercial and industrial applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE 45-degree male flare x 3\/4-inch MPT configuration for reliable flare-to-pipe transitions\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion and provides compatibility with a wide range of fluids\u003c\/li\u003e\n  \u003cli\u003eRated to 650 psi for medium-pressure hydraulic and fluid-transfer service\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -65 to 250 degrees F suits both low-temperature and elevated-heat environments\u003c\/li\u003e\n  \u003cli\u003e1.06-inch hex enables installation with a standard open-end or combination wrench\u003c\/li\u003e\n  \u003cli\u003eCompatible with tubing having a minimum wall thickness of 0.035 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with aluminum, brass, copper, and steel hydraulic tubing that can be flared to SAE 45-degree specifications. Suitable for any system accepting a 7\/8-14 male flare and a 3\/4-14 male pipe thread connection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified plumber, hydraulic technician, or mechanical contractor. De-pressurize and drain the system fully before removing or installing any fitting. Apply thread sealant appropriate for the fluid type to the MPT threads; do not apply sealant to the flare seating surfaces. Tighten to snug engagement with a wrench on the hex flat  -  do not over-torque brass fittings, as this can crack the fitting body or distort the flare seat.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 5\/8 inches (SAE 45 Degree Male Flared)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 3\/4 inches (MPT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread\u003c\/strong\u003e: 7\/8-14 x 3\/4-14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Size\u003c\/strong\u003e: 1.06 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.85 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 650 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -65 to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Tube Wall Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 248X10X12\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67949546406194,"sku":"248X10X12","price":16.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/28d28442df5006f3f708dcb87ef9c0ea_6fe11e9d-12f8-41ed-8419-9635870f0b4e.jpg?v=1791694799","url":"https:\/\/voomisupply.com\/products\/midland-industries-248x10x12-half-union-adapter-brass","provider":"Voomi Supply","version":"1.0","type":"link"}