{"product_id":"midland-industries-2402x6-90-deg-inverted-flare-elbow-brass","title":"Midland Industries 2402X6 90 Deg Inverted Flare Elbow Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 2402X6 is a 90-degree inverted flare elbow fitting machined from brass. It connects a 3\/8-inch inverted flared line to a 1\/4-inch male pipe thread (MPT) port, redirecting tubing runs at a right angle within hydraulic and fluid-conveyance systems. The fitting is rated to 1,000 psi and operates across a temperature range of -65 to 250 degrees F. The 5\/8-18 flare thread pairs with a 1\/4-18 NPT male end. Plumbers, HVAC technicians, and hydraulic system mechanics install this type of fitting where a direction change is needed at a threaded port connection.\u003c\/p\u003e\n\u003cp\u003eThis elbow is suited for use with aluminum, brass, copper, and steel hydraulic tubing that can be flared. It is a common choice in low-to-medium-pressure hydraulic lines, refrigeration-adjacent fluid circuits, and fuel or pneumatic systems where inverted flare connections are specified. The compact geometry, with a center-to-end measurement of 0.53 inches by 0.92 inches, makes it practical in tight installation spaces where a straight fitting or larger elbow would not clear surrounding components.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree angle redirects tubing runs at a right angle from a threaded port\u003c\/li\u003e\n  \u003cli\u003e3\/8-inch inverted flare inlet with 5\/8-18 thread specification\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch MPT outlet with 1\/4-18 thread specification\u003c\/li\u003e\n  \u003cli\u003eRated to 1,000 psi working pressure\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -65 to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003eBrass construction compatible with aluminum, brass, copper, and steel flared tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with aluminum, brass, copper, and steel hydraulic tubing that can be flared. Suitable for systems specifying inverted flare fittings with a 3\/8-inch flare by 1\/4-inch MPT connection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified technician familiar with inverted flare fitting assembly. Depressurize and isolate the system completely before removing or installing any fittings. Hand-tighten the flare nut onto the seat first, then wrench-tighten to avoid cross-threading or distorting the flare seat. Do not overtighten the MPT end into the receiving port; use an appropriate thread sealant compatible with the system fluid.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 3\/8 inches (Inverted Flare)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 1\/4 inches (MPT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 5\/8-18 x 1\/4-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAngle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 1,000 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -65 to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter to End\u003c\/strong\u003e: 0.53 x 0.92 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.35 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.165 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2402X6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67948563366194,"sku":"2402X6","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eeae3e4bee9be640913338eb18467569.jpg?v=1791667332","url":"https:\/\/voomisupply.com\/products\/midland-industries-2402x6-90-deg-inverted-flare-elbow-brass","provider":"Voomi Supply","version":"1.0","type":"link"}