{"product_id":"midland-industries-204sae-90-deg-angle-needle-valve-brass","title":"Midland Industries 204SAE 90 Deg Angle Needle Valve Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 204SAE is a 90-degree angle needle valve designed for precise flow control in low-to-medium pressure fluid and gas systems. Built with a brass body and steel handle, this valve connects via a male flared inlet and male pipe thread (MPT) outlet, making it well-suited for refrigeration, HVAC, and plumbing service lines. It is rated to 150 psi and handles temperatures from -45 to 250 degrees F. The pressed-on handle operator provides firm, repeatable shutoff. The 5\/16 x 1\/4 inch nominal size fits compact service applications where space and precise metering matter.\u003c\/p\u003e\u003cp\u003eThis valve is used in residential and light commercial HVAC, refrigeration, and plumbing installations where an angled needle valve is needed for throttling or isolation on a tubing or threaded connection. The male flared x MPT configuration suits service ports, fuel lines, and refrigerant or fluid metering applications. It is domestically produced and carries a brass body construction appropriate for contact with common refrigerants, fuels, and water-based fluids within its rated pressure and temperature range. Licensed HVAC technicians and plumbers are the primary installers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e90-degree angle body for tight-space installations requiring a directional change at the valve\u003c\/li\u003e\n\u003cli\u003eBrass body construction rated for refrigerants, fuels, and compatible fluids\u003c\/li\u003e\n\u003cli\u003eSteel handle with pressed-on operator for positive flow control\u003c\/li\u003e\n\u003cli\u003eRated to 150 psi operating pressure\u003c\/li\u003e\n\u003cli\u003eWide temperature range: -45 to 250 degrees F\u003c\/li\u003e\n\u003cli\u003eMale flared x MPT connection eliminates the need for additional adapters on common service lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-install needle valve for HVAC, refrigeration, and plumbing systems requiring a 5\/16 x 1\/4 inch nominal, male flared x MPT, 90-degree angle needle valve configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician or plumber in accordance with applicable local codes and IFGC or IPC requirements. Shut off all system pressure and isolate the line before removing or installing this valve. Use appropriate flare tooling to ensure a leak-free flared connection, and apply thread sealant on the MPT end as required by code. Note that this valve contains lead and should not be used in potable water applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type\u003c\/strong\u003e: 90 Degree Angle Needle Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Size\u003c\/strong\u003e: 5\/16 x 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Male Flared x MPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2-20 x 1\/4-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Pressure\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -45 to 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop to Inlet Center\u003c\/strong\u003e: 1.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread End to Thread End\u003c\/strong\u003e: 0.90 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop to Bottom\u003c\/strong\u003e: 1.94 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Operator\u003c\/strong\u003e: Pressed-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Content\u003c\/strong\u003e: Contains Lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: Domestic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 204SAE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67952208838962,"sku":"204SAE","price":33.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3af703facff4f06a0aa804b1acc37fbe.jpg?v=1791750097","url":"https:\/\/voomisupply.com\/products\/midland-industries-204sae-90-deg-angle-needle-valve-brass","provider":"Voomi Supply","version":"1.0","type":"link"}