{"product_id":"midland-industries-108031-reducing-companion-flange","title":"Midland Industries 108031 Reducing Companion Flange","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 108031 is a reducing companion flange designed to connect a 2-1\/2 inch threaded pipe to a 2 inch threaded pipe in pressurized piping systems. Constructed from galvanized ductile iron, this flange provides corrosion resistance and durability in demanding water and fluid distribution applications. It features a 4-bolt hole pattern with a 3\/4 inch bolt hole diameter and a 3\/4 inch thick flange face. Rated at a 125 lb pressure class and 150 psi working pressure, it meets ASME B16.42\/AWWA C110 and ASME B1.20.1 dimensional standards. Plumbers and pipefitters install this fitting where a threaded transition and size reduction are required at a flanged connection point.\u003c\/p\u003e\n\u003cp\u003eThis reducing companion flange is suited for residential and commercial plumbing, water distribution, and municipal utility piping where galvanized iron fittings are specified. It is commonly installed at pump flanges, valve connections, and pipeline transition points requiring a reduction from 2-1\/2 inch to 2 inch nominal pipe. The 4-bolt configuration and standardized dimensions make it a direct fit in systems built to ASME and AWWA specifications. Applications include water supply mains, irrigation systems, and industrial fluid piping where pressure ratings and dimensional compliance are required by code or engineering specification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces from 2-1\/2 inch threaded connection to 2 inch threaded connection in a single fitting\u003c\/li\u003e\n  \u003cli\u003eGalvanized ductile iron construction for corrosion resistance and long service life\u003c\/li\u003e\n  \u003cli\u003e125 lb pressure class rated to 150 psi working pressure\u003c\/li\u003e\n  \u003cli\u003e4-bolt hole pattern with 3\/4 inch bolt hole diameter and 4-3\/4 inch hole center-to-center spacing\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B16.42\/AWWA C110 and ASME B1.20.1 dimensional standards\u003c\/li\u003e\n  \u003cli\u003eThread specification: 2-1\/2-8 on the large end and 2-11-1\/2 on the small end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation companion flange for threaded piping systems built to ASME B16.42\/AWWA C110 and ASME B1.20.1 standards at the 125 lb pressure class.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable codes including ASME and AWWA standards. Isolate and depressurize the piping system fully before removing or installing any flange fitting. Apply thread sealant or PTFE tape to all threaded connections per local code requirements. Torque flange bolts evenly in a cross pattern to ensure a leak-free seal, and verify system pressure after reinstating flow.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type 1\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type 2\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 2-1\/2-8 x 2-11-1\/2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Class\u003c\/strong\u003e: 125 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorking Pressure\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Bolt Holes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Center to Center\u003c\/strong\u003e: 4-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlange Thickness\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e: 6 inches OD x 1.19 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Ductile Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Galvanized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimension Standards\u003c\/strong\u003e: ASME B16.42\/AWWA C110, ASME B1.20.1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 7.78 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 108031\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67950087668018,"sku":"108031","price":59.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/19722113a76ade72e46b401b85bb559c_43262d29-a2d1-4b7e-92b7-3f5349ff13cb.jpg?v=1791706661","url":"https:\/\/voomisupply.com\/products\/midland-industries-108031-reducing-companion-flange","provider":"Voomi Supply","version":"1.0","type":"link"}