{"product_id":"midland-industries-10262l-sae-45-deg-flare-adapter-brass","title":"Midland Industries 10262L Sae 45-deg Flare Adapter Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MIDLAND INDUSTRIES 10262L is a male SAE 45-degree flare adapter designed to connect 3\/8-inch male flared tubing to a 1\/8-inch male NPTF port. Thread dimensions are 5\/8-18 on the flare end and 1\/8-27 on the NPTF end. Machined from brass, this fitting provides reliable sealing across a working pressure rating of 1000 psi and an operating temperature range of -65 to 250 degrees F. Plumbers, HVAC technicians, and hydraulic system installers use this adapter to transition between flared tubing lines and threaded pipe ports in tight-tolerance fluid systems.\u003c\/p\u003e\n\u003cp\u003eThis adapter is suited for residential and light commercial applications where copper, brass, aluminum, or steel hydraulic tubing must terminate at an NPT-threaded port. Typical install scenarios include refrigeration line sets, hydraulic control circuits, and fuel or oil delivery systems. Its compact profile  -  measuring approximately 1.1 inches in length and 0.65 inches in width  -  allows installation in confined equipment spaces without requiring additional clearance for bulky fittings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE 45-degree flare geometry for leak-free tubing connections\u003c\/li\u003e\n  \u003cli\u003e1000 psi working pressure rating for hydraulic and refrigeration service\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -65 to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e5\/8-18 male flare thread mates to 3\/8-inch OD tubing flares\u003c\/li\u003e\n  \u003cli\u003e1\/8-27 NPTF thread provides pressure-tight seal without sealant tape in many applications\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion in wet and fluid-handling environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with copper, brass, aluminum, and steel hydraulic tubing. Compatible with any system using a 3\/8-inch SAE 45-degree male flare inlet and a 1\/8-inch NPTF female port.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers, HVAC technicians, or hydraulic system technicians. Always depressurize and evacuate the line before removing or installing any fitting. Hand-tighten the flare connection first to confirm thread engagement, then wrench-tighten to avoid cross-threading or over-torquing the brass body. NPTF threads are designed to seal on thread interference, but consult system specifications to determine whether thread sealant is required for your application.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 3\/8 inches (Male Flared)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 1\/8 inches (Male NPTF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread\u003c\/strong\u003e: 5\/8-18 x 1\/8-27\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorking Pressure\u003c\/strong\u003e: 1000 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -65 to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.65 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.055 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Tubing Materials\u003c\/strong\u003e: Copper, Brass, Aluminum, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10262L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67948631687474,"sku":"10262L","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/155d77c900a5da44f69584deea81ed56_08f8406e-9418-4dfb-815f-3ad633ecce88.jpg?v=1791669189","url":"https:\/\/voomisupply.com\/products\/midland-industries-10262l-sae-45-deg-flare-adapter-brass","provider":"Voomi Supply","version":"1.0","type":"link"}