{"product_id":"midland-industries-00069-1008-brass-90-deg-compression-elbow","title":"Midland Industries 00069-1008 Brass 90 Deg Compression Elbow","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MIDLAND INDUSTRIES 00069-1008 is a forged brass 90-degree elbow fitting designed to transition between a 5\/8-inch compression connection and a 1\/2-inch male NPTF threaded port. Rated for 150 psi and a temperature range of -65 to 250 degrees F, this fitting is suited for refrigeration, HVAC, plumbing, and light industrial tubing runs where a direction change is required at a threaded component interface. The compression end accepts copper, aluminum, and thermoplastic tubing without soldering or special tools. With a 0.68-inch body size and a center-to-end measurement of 1.06 by 1.16 inches, this elbow fits into tight installation spaces while maintaining full flow integrity.\u003c\/p\u003e\u003cp\u003eThis fitting is installed in applications where a compression tubing line must connect to a male NPTF-threaded port at a 90-degree angle. Common scenarios include connecting tubing to valves, gauges, or equipment ports in HVAC systems, plumbing rough-ins, and refrigeration circuits. The male NPTF thread uses a 1\/2-14 thread specification, and the compression side carries a 13\/16-18 thread. It is appropriate for both residential and light commercial service work where copper, aluminum, or thermoplastic tubing is in use.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eForged brass construction for durability in pressurized service\u003c\/li\u003e\n\u003cli\u003e90-degree angle simplifies direction changes at threaded connection points\u003c\/li\u003e\n\u003cli\u003e5\/8-inch compression x 1\/2-inch male NPTF configuration\u003c\/li\u003e\n\u003cli\u003eRated to 150 psi operating pressure\u003c\/li\u003e\n\u003cli\u003eWide temperature range: -65 to 250 degrees F\u003c\/li\u003e\n\u003cli\u003eCompatible with copper, aluminum, and thermoplastic tubing  -  no soldering required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with copper, aluminum, and thermoplastic tubing in compression fitting applications requiring a 5\/8-inch compression to 1\/2-inch male NPTF transition at a 90-degree angle.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by licensed plumbers or HVAC technicians following applicable IPC and IFGC guidelines. Shut off the water or refrigerant supply and relieve system pressure before disassembling or installing any fitting. Hand-tighten the compression nut onto the tubing, then snug with a wrench  -  do not overtighten, as this can deform the ferrule and cause leaks. Apply thread sealant or PTFE tape to the male NPTF threads as appropriate for the service fluid before threading into the mating port.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 5\/8 inches (Compression)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 1\/2 inches (Male NPTF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 13\/16-18 x 1\/2-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Size\u003c\/strong\u003e: 0.68 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to End\u003c\/strong\u003e: 1.06 x 1.16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -65 to 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Forged Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tubing\u003c\/strong\u003e: Copper, Aluminum, Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.175 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MIDLAND INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00069-1008\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MIDLAND INDUSTRIES","offers":[{"title":"Default Title","offer_id":67948287459634,"sku":"00069-1008","price":17.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9c732bee4f1803fdba86b827de301379.jpg?v=1791661484","url":"https:\/\/voomisupply.com\/products\/midland-industries-00069-1008-brass-90-deg-compression-elbow","provider":"Voomi Supply","version":"1.0","type":"link"}