{"product_id":"micro-100-it-160400-internal-threading-tool-solid-carbide","title":"Micro 100 IT-160400 Internal Threading Tool Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MICRO 100 IT-160400 is a solid carbide single point internal threading tool designed for cutting internal threads on CNC lathes and turning centers. It covers a threading range of 27 to 56 threads per inch (TPI) with a minimum thread diameter of 0.16 inches and a cutting depth of 0.4 inches. The 60-degree profile angle suits standard Unified and metric thread forms commonly encountered in precision machining. Machinists and toolroom technicians install this tool in boring bar-style setups where a compact shank is required for small-bore internal thread work. The bright, uncoated finish is suitable for use with a wide range of workpiece materials.\u003c\/p\u003e\u003cp\u003eThe IT-160400 is well suited for internal threading operations in small-diameter bores across production and job-shop environments. The 3\/16-inch shank diameter and 2-inch overall length make it a practical choice for Swiss-style machines, CNC turning centers, and manual lathes where bore access is limited. It does not include coolant-through capability, so conventional flood or mist coolant delivery should be directed externally at the cutting zone during operation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in internal threading applications\u003c\/li\u003e\n\u003cli\u003e27 to 56 TPI range covers a broad spectrum of fine-pitch internal thread standards\u003c\/li\u003e\n\u003cli\u003e0.16 inches minimum thread diameter enables work in small, tight-tolerance bores\u003c\/li\u003e\n\u003cli\u003e60-degree profile angle compatible with standard Unified thread forms\u003c\/li\u003e\n\u003cli\u003e0.04 inches projection from edge for controlled reach into confined bore geometries\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish with no coolant-through requirement simplifies setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style single point internal threading tool for use in 3\/16-inch shank toolholders on CNC lathes, turning centers, and Swiss-style machines capable of thread-cutting cycles.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the machine in a full stop and all motion axes locked out per facility lockout\/tagout procedures. Ensure the shank is seated fully and clamped to the toolholder manufacturer's specified torque range for the holder size. Confirm tool offset and thread-form alignment in the control before initiating the threading cycle. External coolant should be directed at the cutting edge since this tool does not support coolant-through delivery.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Thread Diameter\u003c\/strong\u003e: 0.16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Depth\u003c\/strong\u003e: 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreads Per Inch (TPI) Range\u003c\/strong\u003e: 27 to 56 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProjection from Edge\u003c\/strong\u003e: 0.04 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.026 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242117\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MICRO 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: IT-160400\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MICRO 100","offers":[{"title":"Default Title","offer_id":52072063598898,"sku":"IT-160400","price":71.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/67a16a0deb63b866957b1eaa8df59e25_8f01f05b-42f3-4589-ab2d-f78e3e7eee62.jpg?v=1790049509","url":"https:\/\/voomisupply.com\/products\/micro-100-it-160400-internal-threading-tool-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}