{"product_id":"micro-100-gem-250-4x-square-end-mill-1-4-in-4-flute-carbide","title":"Micro 100 GEM-250-4X Square End Mill 1\/4 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MICRO 100 GEM-250-4X is a 4-flute solid carbide square end mill designed for precision milling operations in a wide range of metalworking and machining applications. With a 1\/4 inch cutting diameter and a 3\/4 inch length of cut, this single-end tool delivers clean, flat-bottomed cuts with tight dimensional control. The 30-degree helix angle improves chip evacuation and reduces cutting forces, while the AlTiN coating provides elevated heat and wear resistance at higher cutting speeds. Machinists and CNC operators working in production shops or job-shop environments rely on this geometry for slotting, profiling, and contouring operations.\u003c\/p\u003e\u003cp\u003eThe GEM-250-4X is suited for use on CNC machining centers and manual mills where a 1\/4 inch shank toolholder is in use. The right-hand cutting and right-hand flute direction make it compatible with standard spindle configurations. Its 2.5 inch overall length provides adequate reach for most conventional workpiece setups without sacrificing rigidity. The AlTiN coating makes it a strong performer in ferrous materials, hardened steels, and high-temperature alloys where tool life under heat load is a primary concern.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n\u003cli\u003eAlTiN coating extends tool life in ferrous metals and elevated-temperature alloys\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip flow and reduced cutting pressure\u003c\/li\u003e\n\u003cli\u003e4-flute configuration balances feed rate capability with chip clearance\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows plunge entry into workpieces\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute for standard CNC spindle compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style solid carbide end mill for use in standard 1\/4 inch shank toolholders on CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the shank fully within a collet or end mill holder to the toolholder manufacturer's specified engagement depth before tightening. Inspect the tool for chips or coating damage before each use. Never exceed the manufacturer's recommended speeds and feeds for the workpiece material and coating type.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.25 inches (1\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches (3\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches (1\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle\/Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MICRO 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: GEM-250-4X\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MICRO 100","offers":[{"title":"Default Title","offer_id":51963900395826,"sku":"GEM-250-4X","price":74.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/291470bae821ff6fea46c6710d10e4c7.jpg?v=1789948706","url":"https:\/\/voomisupply.com\/products\/micro-100-gem-250-4x-square-end-mill-1-4-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}