{"product_id":"micro-100-bb-120600-boring-bar-solid-carbide-right-hand","title":"Micro 100 BB-120600 Boring Bar Solid Carbide Right Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MICRO 100 BB-120600 is a solid carbide boring bar designed for precision internal turning operations on CNC lathes and manual turning centers. It carries a minimum bore diameter of 0.12 inches and a maximum bore depth of 0.6 inches, making it well suited for tight-tolerance small-bore work. The 3\/16-inch shank diameter and 2-inch overall length give it a compact, rigid profile that resists deflection in confined bore applications. An uncoated carbide construction provides consistent edge geometry and suits a wide range of workpiece materials. Licensed machinists and CNC operators install this tool in standard boring bar holders for finish and semi-finish internal turning passes.\u003c\/p\u003e\n\u003cp\u003eThis boring bar is intended for small-bore internal turning where minimal bore diameter clearance and depth control are critical. It performs in both production and job-shop environments on ferrous and non-ferrous materials. The right-hand cutting direction suits standard lathe spindle rotation. A 0.006-inch corner radius supports fine surface finish requirements in precision machining applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in small-bore applications\u003c\/li\u003e\n  \u003cli\u003eMinimum bore diameter of 0.12 inches for tight internal turning clearances\u003c\/li\u003e\n  \u003cli\u003eMaximum bore depth of 0.6 inches for controlled depth passes\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction for standard lathe spindle rotation\u003c\/li\u003e\n  \u003cli\u003e0.006-inch corner radius for fine surface finish in precision bores\u003c\/li\u003e\n  \u003cli\u003eUncoated finish maintains sharp, consistent edge geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-fit boring bar for standard 3\/16-inch boring bar holders used in CNC and manual turning center setups requiring a right-hand, small-bore internal turning tool.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Power down and lock out the lathe spindle before inserting or removing the boring bar from its holder. Secure the shank firmly in the tool holder to the recommended clamping torque specified by the holder manufacturer to prevent tool pull-out during cuts. Inspect the cutting edge for chips or wear before each use, as carbide tooling can fracture if run on a damaged edge.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter\u003c\/strong\u003e: 0.12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Bore Depth\u003c\/strong\u003e: 0.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.006 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOffset\u003c\/strong\u003e: 0.0263 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish Coating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MICRO 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: BB-120600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MICRO 100","offers":[{"title":"Default Title","offer_id":51969378582834,"sku":"BB-120600","price":60.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1bf8437a3a4be64a5db0be695effd036_3b7af349-493c-419e-a80f-ce8663c01f36.jpg?v=1789952229","url":"https:\/\/voomisupply.com\/products\/micro-100-bb-120600-boring-bar-solid-carbide-right-hand","provider":"Voomi Supply","version":"1.0","type":"link"}