{"product_id":"merit-brass-mb11480-45-deg-press-elbow-3-4-in-copper","title":"Merit Brass MB11480 45 Deg Press Elbow 3\/4 in Copper","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MERIT BRASS MB11480 is a 3\/4 inch copper 45-degree press elbow designed for push-to-connect installation in residential and commercial plumbing systems. It provides a reliable directional change in copper piping without soldering, torch work, or threaded connections. Rated to 300 psi maximum working pressure and suitable for temperatures from 0 degrees F to 250 degrees F, this fitting is built for demanding service conditions. Compliant with IAPMO PS117 and NSF-61\/372, it meets lead-free standards required for potable water systems. Licensed plumbers and pipefitters install this fitting as part of new construction, remodel, or retrofit work.\u003c\/p\u003e\u003cp\u003eThe MB11480 is suited for 3\/4 inch copper pipe runs requiring a 45-degree directional offset. Typical applications include domestic water supply, hydronic heating distribution, and radiant system branch lines. Its press-style connection method is well matched to tight spaces where torch access is limited or where open-flame work is restricted by code. The push-to-connect end eliminates soldering labor, making it a practical choice on both new copper runs and repair work where line draining is complete.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePush-to-connect press fitting — no soldering, torch, or flux required\u003c\/li\u003e\n\u003cli\u003eRated to 300 psi maximum working pressure\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: 0 degrees F to 250 degrees F\u003c\/li\u003e\n\u003cli\u003eLead-free copper construction meets NSF-61\/372 potable water requirements\u003c\/li\u003e\n\u003cli\u003eCompliant with IAPMO PS117 standard for press-connect fittings\u003c\/li\u003e\n\u003cli\u003e45-degree angle for directional offset in tight plumbing runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style press elbow for 3\/4 inch copper pipe systems using push-to-connect press fittings with an outside diameter of 1.252 inches.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a licensed plumber or pipefitter following local plumbing code and IPC requirements. Shut off the water supply and fully depressurize and drain the line before inserting the fitting. Ensure pipe ends are cut square, deburred, and cleaned before pressing. Use only a compatible press tool rated for copper press fittings — do not substitute crimp or compression tooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 45 Degree Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.252 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Push-to-Connect Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 300 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: 0 degrees F (-17 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Free\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: IAPMO PS117, NSF-61\/372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MERIT BRASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MB11480\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MERIT BRASS","offers":[{"title":"Default Title","offer_id":51538749227314,"sku":"MB11480","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ff90a95ab5cf9589a5b20ddeb8f5bf0a.jpg?v=1785826063","url":"https:\/\/voomisupply.com\/products\/merit-brass-mb11480-45-deg-press-elbow-3-4-in-copper","provider":"Voomi Supply","version":"1.0","type":"link"}