{"product_id":"mcr-safety-pd43612xxl-cut-resistant-gloves-2xl-a9","title":"Mcr Safety PD43612XXL Cut Resistant Gloves 2XL A9","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MCR SAFETY PD43612XXL is a driver-style work glove rated ANSI Cut A9 and ANSI Puncture 5, placing it among the most protective cut- and puncture-resistant gloves available for industrial trade use. The palm and cuff are constructed from goatskin leather, delivering tactile feedback and durability. A Kevlar lining adds cut resistance throughout the glove, while a thermoplastic elastomer (TPE) back panel absorbs impact. The reinforced thumb crotch addresses one of the most common failure points in driver-style gloves. ANSI Abrasion Level 4 rating rounds out the protection profile. This glove is worn by electricians, pipefitters, ironworkers, and general maintenance techs working in environments with sharp edges, puncture hazards, or abrasive surfaces.\u003c\/p\u003e\n\u003cp\u003eThe PD43612XXL fits size X-Large and 2X-Large hands in both mens and womens sizing. It is suited for heavy industrial applications including sheet metal handling, pipe fitting, structural steel work, and equipment maintenance where simultaneous cut, puncture, and abrasion hazards are present. The slip-on cuff style allows quick donning and doffing during active job-site work. The driver-style cut leaves the back of the hand partially exposed for ventilation and dexterity. Color is orange on the back panel and white on the palm side.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eANSI\/ISEA Cut Resistance Level A9 -- highest standard cut protection tier\u003c\/li\u003e\n  \u003cli\u003eANSI\/ISEA Puncture Resistance Level 5 -- maximum puncture rating\u003c\/li\u003e\n  \u003cli\u003eANSI\/ISEA Abrasion Resistance Level 4 for extended wear against rough surfaces\u003c\/li\u003e\n  \u003cli\u003eGoatskin leather palm and cuff for durability and grip retention\u003c\/li\u003e\n  \u003cli\u003eKevlar lining throughout for cut and heat resistance\u003c\/li\u003e\n  \u003cli\u003eThermoplastic elastomer back panel with ANSI Impact Level 1 rating\u003c\/li\u003e\n  \u003cli\u003eReinforced thumb crotch reduces wear at a high-stress failure point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose cut, puncture, and abrasion-resistant driver glove for trade and industrial use in size X-Large and 2X-Large. Part of the MCR SAFETY PD43612 series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInspect gloves before each use for cuts, punctures, or separation at seams -- damaged gloves must be replaced before work begins. High cut-resistance ratings do not confer cut-proof protection; select gloves appropriate to the specific hazard level as part of a complete PPE assessment. Follow jobsite PPE protocols and applicable OSHA hand protection requirements (29 CFR 1910.138) when specifying gloves for the task. Store away from direct sunlight and solvents to preserve leather and Kevlar lining integrity.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Cut Resistance Level\u003c\/strong\u003e: A9\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Puncture Resistance Level\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Abrasion Resistance Level\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Impact Rating\u003c\/strong\u003e: Level 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlove Style\u003c\/strong\u003e: Drivers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCuff Style\u003c\/strong\u003e: Slip-On\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: X-Large \/ 2X-Large\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Material\u003c\/strong\u003e: Goatskin \/ HPPE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLining Material\u003c\/strong\u003e: Kevlar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Material\u003c\/strong\u003e: Goatskin \/ Thermoplastic Elastomer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCuff Material\u003c\/strong\u003e: Goatskin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Orange \/ White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand\u003c\/strong\u003e: Pair\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlood Borne Pathogen Barrier\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 11 inches x 5 inches x 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.62 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 pair\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 46181536\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MCR SAFETY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PD43612XXL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MCR SAFETY","offers":[{"title":"Default Title","offer_id":51542775038258,"sku":"PD43612XXL","price":69.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eab93af6d222027708d4ce1d1a12b353_670bbc43-c7b3-4925-9022-337e0651f4fa.jpg?v=1785907021","url":"https:\/\/voomisupply.com\/products\/mcr-safety-pd43612xxl-cut-resistant-gloves-2xl-a9","provider":"Voomi Supply","version":"1.0","type":"link"}