{"product_id":"mcr-safety-n9690fcom-cut-resistant-gloves-size-m-a3","title":"Mcr Safety N9690FCOM Cut Resistant Gloves Size M A3","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MCR SAFETY N9690FCOM is a full-coated, cut- and puncture-resistant work glove designed for trade professionals who need reliable hand protection in wet, cold, or abrasive conditions. The glove carries an ANSI\/ISEA Cut Level A3, Puncture Level 2, and Abrasion Level 3 rating under ANSI 105:2020 and 105:2016 standards. A 15-gauge acrylic terry liner provides insulation and warmth while allowing airflow to keep hands drier during extended wear. The HPT polyurethane coating delivers a water-repellent, rough-grip surface and wraps the hand completely for maximum coverage. At 0.375 pounds per pair, this glove is well-suited for HVAC technicians, plumbers, electricians, and general trade workers handling sheet metal, pipe, conduit, or other abrasive materials in cold or damp environments.\u003c\/p\u003e\n\u003cp\u003eThe N9690FCOM is sized for medium hands and is unisex in fit. It is intended for use in residential and commercial job sites where workers face simultaneous cut, puncture, and abrasion hazards, particularly in lower-temperature conditions where an insulated liner adds practical value. The full HPT coating makes it suitable for tasks involving light moisture exposure, such as outdoor installation work, pipe handling, or equipment service in unheated spaces. The knit cuff with a 3-inch cuff length helps seal out debris at the wrist. Sold as a pair.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eANSI\/ISEA Cut Level A3 per ANSI 105:2020 for reliable cut resistance on edges and sharp materials\u003c\/li\u003e\n  \u003cli\u003eANSI\/ISEA Puncture Level 2 per ANSI 105:2016 for protection against pointed hazards\u003c\/li\u003e\n  \u003cli\u003eANSI\/ISEA Abrasion Level 3 per ANSI 105:2016 for durability on rough surfaces\u003c\/li\u003e\n  \u003cli\u003e15-gauge acrylic terry lining insulates and cushions while allowing air circulation\u003c\/li\u003e\n  \u003cli\u003eFull HPT polyurethane coating provides 360-degree water-repellent grip on rough surfaces\u003c\/li\u003e\n  \u003cli\u003eSeamless lining and knit cuff construction for all-day wearability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style work glove replacement for medium-hand users requiring cut, puncture, and abrasion resistance in cold or damp trade environments. Part of the MCR SAFETY N9690FCO series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInspect gloves before each use for coating separation, liner damage, or wear-through at the palm and fingertips. Do not use these gloves as a substitute for electrical-insulating gloves rated for live-voltage work. Launder or replace when the coating integrity or cut-resistance liner shows visible degradation. Follow applicable OSHA hand protection standards and site PPE requirements when selecting and using cut-resistant gloves.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Cut Resistance Level\u003c\/strong\u003e: A3 (ANSI 105:2020)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Puncture Resistance Level\u003c\/strong\u003e: 2 (ANSI 105:2016)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Abrasion Resistance Level\u003c\/strong\u003e: 3 (ANSI 105:2016)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Contact Heat Level\u003c\/strong\u003e: 2 (ANSI 105:2016)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEN 388 Rating\u003c\/strong\u003e: 3232\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Material\u003c\/strong\u003e: HPT Polyurethane\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Coverage\u003c\/strong\u003e: Full\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Lining Material\u003c\/strong\u003e: Acrylic Terry, 15-Gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Material\u003c\/strong\u003e: Acrylic Terry\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCuff Material\u003c\/strong\u003e: Knit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCuff Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrip Surface\u003c\/strong\u003e: Rough\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Orange\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: Medium (Unisex)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLining Seams\u003c\/strong\u003e: Seamless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 9.84 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 4.13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.375 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand\u003c\/strong\u003e: Pair\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI 105:2020, ANSI 105:2016, EN 388\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MCR SAFETY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: N9690FCOM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MCR SAFETY","offers":[{"title":"Default Title","offer_id":51720936423730,"sku":"N9690FCOM","price":19.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d86a609545299938db8371e5a2f7b77d_f4027f4b-2cfb-455d-be9c-d6f1d74878e1.jpg?v=1788571205","url":"https:\/\/voomisupply.com\/products\/mcr-safety-n9690fcom-cut-resistant-gloves-size-m-a3","provider":"Voomi Supply","version":"1.0","type":"link"}