{"product_id":"mcr-safety-9677xs-cut-resistant-gloves-x-small-dyneema","title":"Mcr Safety 9677XS Cut Resistant Gloves X-small Dyneema","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MCR SAFETY 9677XS is a cut resistant work glove built around a 13-gauge certified DSM Dyneema Diamond Technology blended shell with a polyurethane (PU) coated palm and fingers. Dyneema fiber is recognized in the trade for its high strength-to-weight ratio and its ability to dissipate body heat while wicking moisture from inside the glove to the outside. The result is a cooler, more comfortable fit during extended wear — a practical factor for hand protection compliance on active job sites. This glove is sized X-Small and ships in pairs.\u003c\/p\u003e\n\u003cp\u003eThe 9677XS is suited for light to medium-duty hand protection tasks where cut resistance and tactile dexterity are both required. Typical applications include assembly, parts handling, light fabrication, and inspection work. The PU palm coating provides grip on dry and slightly oily surfaces without adding significant bulk, making it well-suited for tasks requiring finger sensitivity. The X-Small sizing makes it a practical fit for workers whose hands are not accommodated by standard sizing.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e13-gauge certified DSM Dyneema Diamond Technology blended shell for cut resistance with minimal bulk\u003c\/li\u003e\n  \u003cli\u003ePU coated palm and fingers for dry and light oil grip\u003c\/li\u003e\n  \u003cli\u003eDyneema fiber dissipates body heat and moves moisture outward for extended comfortable wear\u003c\/li\u003e\n  \u003cli\u003eWhite shell and palm coating for clean-environment visibility\u003c\/li\u003e\n  \u003cli\u003eX-Small sizing for workers requiring a close, precise fit\u003c\/li\u003e\n  \u003cli\u003eSold in pairs; minimum order quantity is 12 pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-buy cut resistant glove for light to medium-duty industrial and assembly applications requiring a 13-gauge knit shell with palm coating.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInspect gloves before each use for tears, coating separation, or worn areas that reduce cut protection. Replace immediately if the shell or coating shows damage. Follow the employer hazard assessment and applicable ANSI\/ISEA 105 hand protection selection guidelines when specifying cut-resistant gloves for a task. Launder per manufacturer guidance to maintain fiber integrity and coating adhesion.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGauge\u003c\/strong\u003e: 13\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShell Material\u003c\/strong\u003e: DSM Dyneema Diamond Technology blended fiber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePalm Coating\u003c\/strong\u003e: Polyurethane (PU)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: X-Small\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: Pair\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 12 pairs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.11 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 20.87 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 11.81 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 14.17 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 451439677041\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MCR SAFETY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9677XS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MCR SAFETY","offers":[{"title":"Default Title","offer_id":51346200363314,"sku":"9677XS","price":165.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310509483.jpg?v=1782073688","url":"https:\/\/voomisupply.com\/products\/mcr-safety-9677xs-cut-resistant-gloves-x-small-dyneema","provider":"Voomi Supply","version":"1.0","type":"link"}