{"product_id":"mcr-safety-9363xs-cut-resistant-gloves-kevlar-x-small","title":"Mcr Safety 9363XS Cut Resistant Gloves Kevlar X-small","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MCR SAFETY 9363XS is a 7-gauge cut-resistant glove designed for trades and industrial work where hand protection from sharp edges, abrasion, and material handling hazards is required. The outer shell is knit from DuPont Kevlar fiber, and the interior is lined with cotton for comfort during extended wear. PVC dots are applied to both the palm and back of the hand, improving grip and adding a layer of abrasion resistance. This glove is sized X-Small and sold in pairs, making it suitable for workers who need a close, secure fit without sacrificing dexterity.\u003c\/p\u003e\u003cp\u003eThe 9363XS is suited for light industrial, manufacturing, assembly, and general trade applications where cut protection and grip are priorities. The knit wrist construction helps keep the glove in place during use. The two-sided PVC dot pattern is particularly useful in applications involving wet or oily surfaces where bare knit would lose traction. Electricians, plumbers, sheet metal workers, and general contractors commonly use gloves of this type for handling pipe, conduit, sheet stock, and other materials with sharp edges.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e7-gauge DuPont Kevlar outer shell provides cut resistance at an economical price point\u003c\/li\u003e\n\u003cli\u003eCotton interior lining for all-day comfort\u003c\/li\u003e\n\u003cli\u003ePVC dots on both palm and back for enhanced grip and abrasion resistance\u003c\/li\u003e\n\u003cli\u003eKnit wrist design for secure fit and debris exclusion\u003c\/li\u003e\n\u003cli\u003eX-Small sizing for a close fit with minimal bulk\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose cut-resistant work glove for light industrial, assembly, and trade applications requiring ANSI-level cut protection in an X-Small fit.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInspect gloves before each use for cuts, tears, or degraded PVC dots that may reduce protection. Replace immediately if the Kevlar shell shows signs of fraying or the PVC coating is separating. Do not use as a substitute for arc flash, high-voltage, or chemical-resistant glove requirements where dedicated PPE is mandated by OSHA or NFPA 70E.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge\u003c\/strong\u003e: 7 ga\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Material\u003c\/strong\u003e: DuPont Kevlar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Material\u003c\/strong\u003e: Cotton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip Coating\u003c\/strong\u003e: PVC dots, two sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: X-Small\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Brown\/Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 18.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 13.78 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 10.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 451439363043\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MCR SAFETY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9363XS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MCR SAFETY","offers":[{"title":"Default Title","offer_id":51344076636466,"sku":"9363XS","price":66.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310508014.jpg?v=1782028490","url":"https:\/\/voomisupply.com\/products\/mcr-safety-9363xs-cut-resistant-gloves-kevlar-x-small","provider":"Voomi Supply","version":"1.0","type":"link"}