{"product_id":"matco-norca-clfm0303lf-1-2-in-lead-free-brass-90-cxm-elbow","title":"Matco-norca clfm0303lf 1\/2 in Lead-free Brass 90 Cxm Elbow","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MATCO-NORCA clfm0303lf is a lead-free brass 90-degree elbow adapter designed for copper plumbing systems. It connects a female soldered (sweat) end to a male threaded end, making it a CxM transition fitting. Built from brass and fully lead-free compliant, this fitting is suited for potable water applications where code-required lead-free materials are mandatory. Licensed plumbers install this fitting when transitioning from copper tubing to a threaded connection at a 90-degree change of direction. Both ports are sized at 1\/2 inch, and center-to-end distances measure 0.95 inches and 1.32 inches respectively.\u003c\/p\u003e\n\u003cp\u003eThis fitting is used in residential and light commercial plumbing systems wherever a 90-degree directional change is needed between a copper sweat line and a male threaded connection point. Typical applications include supply line connections to fixtures, valves, and equipment stubs. The lead-free brass construction meets requirements for drinking water systems under current plumbing codes. It is packaged in quantities of 25 per inner pack and 250 per master carton, making it practical for plumbing contractors stocking job-site supplies.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLead-free brass construction meets potable water compliance requirements\u003c\/li\u003e\n  \u003cli\u003e90-degree angle for directional transitions in copper plumbing runs\u003c\/li\u003e\n  \u003cli\u003eCxM end connection: female soldered sweat inlet by male threaded outlet\u003c\/li\u003e\n  \u003cli\u003eBoth ports sized at 1\/2 inch for consistent line sizing\u003c\/li\u003e\n  \u003cli\u003eCenter-to-end distances of 0.95 inches and 1.32 inches for tight-space planning\u003c\/li\u003e\n  \u003cli\u003ePackaged 25 per inner and 250 per master carton for contractor convenience\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for 1\/2 inch copper sweat-to-male-threaded connections in residential and commercial potable water plumbing systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed plumber. Shut off the water supply and depressurize and drain the line before soldering. The female sweat end is joined to copper tubing using standard lead-free solder per applicable plumbing codes such as the IPC or UPC. Apply thread sealant or PTFE tape to the male threaded end before making the threaded connection, and avoid over-tightening to prevent brass thread damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Elbow Adapter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAngle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize A\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize B\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Female Soldered (Sweat) x Male Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Free\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter-to-End Distance\u003c\/strong\u003e: 0.95 inches and 1.32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Plumbing System\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging Quantity\u003c\/strong\u003e: 25 per inner, 250 per master\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MATCO-NORCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: clfm0303lf\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MATCO-NORCA","offers":[{"title":"Default Title","offer_id":51468247630130,"sku":"CLFM0303LF","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946344.jpg?v=1783915796","url":"https:\/\/voomisupply.com\/products\/matco-norca-clfm0303lf-1-2-in-lead-free-brass-90-cxm-elbow","provider":"Voomi Supply","version":"1.0","type":"link"}