{"product_id":"magafor-88860005990-chucking-reamer-0-2358-in-carbide","title":"Magafor 88860005990 Chucking Reamer 0.2358 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MAGAFOR 88860005990 is a solid carbide chucking reamer designed for precision hole finishing in machine shop and production environments. With a reamer diameter of 0.2358 inches (5.99 mm) and a diameter tolerance of 0.0000 to +0.0004 mm, this tool delivers tight, repeatable results in ferrous and non-ferrous materials. The 6-flute geometry with left-hand spiral fluting promotes smooth chip evacuation while the right-hand cutting direction maintains conventional rotation. A bright polished finish reduces friction and helps extend tool life. Machinists and tool room technicians use this reamer in CNC machining centers, knee mills, and drill presses where straight-shank toolholders are standard.\u003c\/p\u003e\n\u003cp\u003eThis chucking reamer is suited for finish reaming operations requiring close hole tolerances in production and job shop settings. The straight shank allows direct clamping in standard chucks or collet systems without additional adapters. With an overall length of 3-31\/32 inches and a flute length of 1-7\/64 inches, it handles typical through-hole and blind-hole applications in light to medium workpiece depths. It is not configured as a dowel pin reamer or an over\/under size reamer, making it appropriate for standard nominal hole sizing at the 0.2358-inch diameter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard or abrasive materials\u003c\/li\u003e\n  \u003cli\u003e6-flute, left-hand spiral design promotes efficient chip flow during right-hand cutting\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance of 0.0000 to +0.0004 mm supports tight hole finish requirements\u003c\/li\u003e\n  \u003cli\u003eBright polished coating reduces built-up edge and friction at the cutting zone\u003c\/li\u003e\n  \u003cli\u003eStraight shank compatible with standard chucks and collet toolholders\u003c\/li\u003e\n  \u003cli\u003eCompact overall length of 3-31\/32 inches suits common workpiece setups without excessive overhang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard straight-shank chucks and collet systems on CNC machining centers, manual mills, and drill presses requiring a 0.2358-inch finish reamer in the 5.00 to 6.00 mm diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists familiar with reaming operations and machine tool setup. Secure the straight shank firmly in a collet or chuck to minimize runout before engaging the workpiece. Power down and lock out the machine before changing or inspecting tooling. Use appropriate cutting fluid for the workpiece material to maintain tool life and hole finish quality.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Inch)\u003c\/strong\u003e: 0.2358 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter (mm)\u003c\/strong\u003e: 5.99 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter Range\u003c\/strong\u003e: 0.2000 to 0.2499 inches (5.00 to 6.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: 0.0000 to +0.0004 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-31\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-7\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright (Polished)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MAGAFOR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 88860005990\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAGAFOR","offers":[{"title":"Default Title","offer_id":67906030567730,"sku":"88860005990","price":144.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4e4a49e728cd83a615adf46cf60a4d05.jpg?v=1791163253","url":"https:\/\/voomisupply.com\/products\/magafor-88860005990-chucking-reamer-0-2358-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}