{"product_id":"magafor-88860004080-chucking-reamer-0-1606-in-solid-carbide","title":"Magafor 88860004080 Chucking Reamer 0.1606 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe MAGAFOR 88860004080 is a solid carbide chucking reamer designed for precision hole finishing in metalworking and machining applications. With a reamer diameter of 0.1606 inches and a diameter tolerance of 0.0000 to +0.0004 mm, this tool holds tight dimensional accuracy required for close-tolerance bores. The six-flute, spiral-flute geometry with a left-hand spiral and right-hand cutting direction promotes smooth chip evacuation and a refined surface finish. The bright polished coating reduces friction and extends tool life. Machinists and tool room technicians install this reamer in CNC machining centers, drill presses, and manual lathes equipped with standard chucks or collets.\u003c\/p\u003e\n\u003cp\u003eThis chucking reamer is suited for finishing pre-drilled or bored holes in ferrous and non-ferrous metals where dimensional consistency is critical. The straight shank fits standard chucks and collet holders common to production and job-shop environments. With an overall length of 2-61\/64 inches and a 3\/4 inch flute length, the tool is sized for shallow-to-moderate depth reaming in typical fixture and part setups. It is sold individually and is a direct pick for applications requiring precision in the 0.1500 to 0.1999 inch diameter range.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard or abrasive materials\u003c\/li\u003e\n  \u003cli\u003eSix flutes with left-hand spiral geometry for smooth chip flow and consistent surface finish\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction compatible with standard spindle rotation\u003c\/li\u003e\n  \u003cli\u003eBright polished finish reduces built-up edge and lowers cutting friction\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance of 0.0000 to +0.0004 mm supports close-tolerance bore requirements\u003c\/li\u003e\n  \u003cli\u003eStraight shank fits standard chucks and collet systems without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style precision reamer for use in machining centers, drill presses, and lathes equipped with standard straight-shank chucks or collet holders accepting tools in the 0.1500 to 0.1999 inch diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists familiar with rotating cutting tool setups. Secure the straight shank fully in a matched chuck or collet and verify runout before cutting. Power down the spindle completely before tool changes and follow applicable shop safety procedures for carbide tooling. Do not exceed recommended feed and speed parameters for the workpiece material to avoid chipping the carbide cutting edges.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.1606 inches (4.08 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter Range\u003c\/strong\u003e: 0.1500 to 0.1999 inches (4.00 to 5.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: 0.0000 to +0.0004 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-61\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright (Polished)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MAGAFOR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 88860004080\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAGAFOR","offers":[{"title":"Default Title","offer_id":67907188130098,"sku":"88860004080","price":109.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8fa8d8e6f07b9b473981b0c84f99163a.jpg?v=1791175444","url":"https:\/\/voomisupply.com\/products\/magafor-88860004080-chucking-reamer-0-1606-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}