{"product_id":"magafor-88860001510-chucking-reamer-size-53-solid-carbide","title":"Magafor 88860001510 Chucking Reamer Size 53 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe MAGAFOR 88860001510 is a solid carbide chucking reamer designed for precision hole finishing in metalworking and machining applications. Sized to wire gauge #53 with a decimal diameter of 0.0594 inches and a diameter tolerance of plus or minus 0.0002 inches, this reamer delivers tight, repeatable bore geometry in a single pass. The 4-flute left-hand spiral configuration provides smooth chip evacuation and reduced chatter during right-hand cutting operation. The straight-cylindrical shank seats directly in a standard chuck or collet without adapter hardware. Licensed machinists and toolroom technicians are the primary users.\u003c\/p\u003e\u003cp\u003eThis reamer fits production and job-shop environments where small-diameter bore accuracy is critical. Typical applications include finish-reaming pre-drilled holes in ferrous and non-ferrous metals, plastics, and composites where a close tolerance fit is required. The bright, uncoated carbide surface is suited to dry cutting or light lubrication setups. At 1.58 inches overall length with a 25\/64-inch flute length, it is sized for shallow-to-moderate depth holes in fixtures, components, and precision assemblies. It carries the MAGAFOR Series 8600 designation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWire gauge size #53 with 0.0594 inch decimal diameter and plus or minus 0.0002 inch tolerance\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for wear resistance and dimensional stability\u003c\/li\u003e\n\u003cli\u003e4-flute left-hand spiral geometry promotes smooth chip flow during right-hand cutting\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank for direct chuck or collet mounting\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish compatible with dry cutting and light-lubricant applications\u003c\/li\u003e\n\u003cli\u003eNo coolant-through requirement simplifies setup on standard spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit chucking reamer for standard straight-bore chucks and collet holders accepting a straight-cylindrical shank in the applicable diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and operation should be performed by a qualified machinist following standard shop safety procedures. Ensure the spindle is fully stopped and the machine is locked out before changing or inspecting the reamer. Seat the shank fully in the chuck or collet and verify runout with a dial indicator before taking a finishing pass. Do not exceed the manufacturer-recommended feed and speed range for the workpiece material and reamer diameter.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Wire Size)\u003c\/strong\u003e: #53\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Decimal Inch)\u003c\/strong\u003e: 0.0594 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: plus or minus 0.0002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.58 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.3906 inches (25\/64 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 8600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0044 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: MAGAFOR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 88860001510\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAGAFOR","offers":[{"title":"Default Title","offer_id":67915388092722,"sku":"88860001510","price":51.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c239b3f9c4575f59d5c9d5cb45394150.jpg?v=1791253383","url":"https:\/\/voomisupply.com\/products\/magafor-88860001510-chucking-reamer-size-53-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}