{"product_id":"m-k-morse-3654141380-bandsaw-blade-138-in-14-tpi","title":"M.k. Morse 3654141380 Bandsaw Blade 138 in 14 Tpi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.K. MORSE 3654141380 is a welded bi-metal bandsaw blade engineered for consistent, accurate cutting in metal fabrication and industrial shop environments. Measuring 138 inches (11 feet 6 inches) in length and 0.75 inches wide with a 0.035-inch thickness, this blade runs on horizontal and vertical bandsaws sized to accept that loop length. The 14 TPI constant pitch tooth pattern delivers smooth, controlled cuts through aluminum and non-ferrous metals. The M42 high speed steel tooth tips bonded to a flexible backing provide durability under continuous use. Installation and operation are handled by experienced metalworking tradespeople and maintenance technicians.\u003c\/p\u003e\n\u003cp\u003eThis blade is designed for contour cutting applications in aluminum, copper, brass, and other non-ferrous metals. The Matrix II Raker series uses a raker tooth set with a straight tooth form and no rake angle, making it well suited for steady feed-rate cutting where surface finish and dimensional accuracy matter. It fits bandsaws that accept an 11-foot 6-inch welded loop blade, commonly found in job shops, fabrication facilities, and industrial maintenance settings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBi-metal construction with M42 high speed steel tooth tips for extended blade life\u003c\/li\u003e\n  \u003cli\u003e14 TPI constant pitch pattern for smooth cuts in non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eRaker tooth set with straight tooth form for consistent chip clearance\u003c\/li\u003e\n  \u003cli\u003eFlexible back supports contour cutting and curved cuts\u003c\/li\u003e\n  \u003cli\u003eWelded loop construction eliminates blade joining on site\u003c\/li\u003e\n  \u003cli\u003eMatrix II Raker series engineered for aluminum and non-ferrous metal applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for bandsaws that accept a welded loop blade measuring 138 inches (11 feet 6 inches) in length and 0.75 inches in width. Suitable for cutting aluminum and non-ferrous metals.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBlade installation should be performed by a qualified metalworking technician or experienced machine operator. Power down and lock out the bandsaw before removing the worn blade or installing a new one. Verify wheel-to-wheel distance, blade guides, and blade tension settings on the machine before operating. Do not exceed the blade speed rating of the host machine, and confirm blade width compatibility with installed guides before tensioning.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Length\u003c\/strong\u003e: 138 inches (11 feet 6 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI)\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Pattern\u003c\/strong\u003e: Constant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Material\u003c\/strong\u003e: Bi-Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Set\u003c\/strong\u003e: Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Form\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Rake Angle\u003c\/strong\u003e: No Angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Type\u003c\/strong\u003e: Flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Toothed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContour Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Aluminum, Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Matrix II Raker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.K. MORSE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3654141380\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MK MORSE","offers":[{"title":"Default Title","offer_id":51693475561778,"sku":"3654141380","price":90.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b8c2d5a8e46130ede3c17bb8ee51fbd5.jpg?v=1788312962","url":"https:\/\/voomisupply.com\/products\/m-k-morse-3654141380-bandsaw-blade-138-in-14-tpi","provider":"Voomi Supply","version":"1.0","type":"link"}