{"product_id":"m-a-ford-92037501-countersink-60-degree-3-flute-hss","title":"M.a. Ford 92037501 Countersink 60 Degree 3 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD 92037501 is a single-end, three-flute countersink designed for chamfering, countersinking, and deburring operations in metalworking and fabrication environments. Built from high-speed steel (HSS) with a bright, uncoated finish, it features a 60-degree included angle and a 0.375-inch head diameter. The straight-cylindrical shank measures 0.25 inches in diameter, and the tool has an overall length of 1.625 inches. It is installed and used by machinists, tool-and-die technicians, and maintenance professionals working with hand drills, drill presses, and milling machines.\u003c\/p\u003e\u003cp\u003eThis countersink is suited for light to medium material removal on non-ferrous and soft ferrous materials. It is well-matched to production and maintenance operations where clean, consistent chamfers and deburring are required on close-tolerance holes. The tip diameter is 0.110 inches, allowing it to start cleanly in pre-drilled holes without a pilot. No pilot is included or required for the intended material applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e60-degree included angle produces standard chamfers for fastener seating and edge prep\u003c\/li\u003e\n\u003cli\u003eThree flutes provide smooth cutting action and good chip clearance\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction handles repeated use across a range of soft and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suited for aluminum, brass, magnesium, plastic, and similar materials\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard drill chucks and collet holders\u003c\/li\u003e\n\u003cli\u003eCompact 1.625-inch overall length works in confined setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on aluminum, brass, high-nickel steel, magnesium, magnesium alloy, Monel, and plastic. The straight-cylindrical 0.25-inch shank fits standard drill press chucks, hand drill chucks, and collet systems accepting that shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool is installed by machinists and maintenance technicians using standard drill chucks or collet holders. Secure the shank firmly before operation and confirm the chuck or collet is rated for the intended spindle speed. Deburr or chamfer only pre-drilled holes; do not use this tool to initiate a hole from solid stock. Follow standard shop safety practices including eye protection and secure workholding.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenterline Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Diameter\u003c\/strong\u003e: 0.110 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Pilot\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Aluminum, Brass, High-Nickel Steel, Magnesium, Magnesium Alloy, Monel, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112812\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 92037501\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51727478554930,"sku":"92037501","price":30.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/031b2f89ea44aff4cbe5338d607530fc.jpg?v=1788678361","url":"https:\/\/voomisupply.com\/products\/m-a-ford-92037501-countersink-60-degree-3-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}