{"product_id":"m-a-ford-78125002-countersink-82-degree-6-flute-carbide","title":"M.a. Ford. 78125002 Countersink 82 Degree 6 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 78125002 is a solid carbide countersink designed for precision chamfering, countersinking, and deburring across a wide range of metallic and non-metallic materials. It features a 1.25-inch head diameter, an 82-degree included angle, and a six-flute right-hand cutting geometry that produces clean, consistent countersunk profiles. The 0.5-inch straight cylindrical shank and 3-inch overall length make it compatible with standard drill presses, CNC machining centers, and manual milling setups. A bright, uncoated finish is retained from the solid carbide substrate, which provides inherent hardness and wear resistance without an added coating layer. This tool is suited for production and maintenance machining environments where repeatability and material versatility are required.\u003c\/p\u003e\n\u003cp\u003eThis countersink is applicable in both production shop and maintenance-repair-and-operations settings. Its multi-material compatibility makes it a practical single-tool solution for machinists working with mixed workpiece materials on the same setup. Typical applications include preparing holes for flat-head fasteners, breaking sharp edges on drilled holes, and creating chamfers on part features. The six-flute design reduces chatter compared to fewer-flute alternatives, making it effective on harder alloys including stainless steel, high-tensile steel, high-nickel alloys, and Monel, as well as softer materials such as aluminum, brass, magnesium, and plastic.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e82-degree included angle suitable for standard flat-head fastener countersinking\u003c\/li\u003e\n  \u003cli\u003eSix-flute right-hand cutting geometry reduces chatter and improves surface finish\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for hardness and wear resistance across diverse materials\u003c\/li\u003e\n  \u003cli\u003e1.25-inch head diameter with 0.5-inch straight cylindrical shank for broad machine compatibility\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish — no coating delamination risk on abrasive or interrupted cuts\u003c\/li\u003e\n  \u003cli\u003eSingle-end, no-pilot design for use with pre-drilled or pre-punched holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for chamfering, countersinking, and deburring operations on alloy steel, aluminum, brass, cast iron, high-nickel steel, high-tensile steel, magnesium, magnesium alloy, mild steel, Monel, plastic, and stainless steel workpieces. Fits any machine spindle or chuck accepting a 0.5-inch straight cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by a qualified machinist familiar with rotating cutting tool safety. Secure the shank fully in the collet or drill chuck and verify runout before cutting. Power down and lock out the machine spindle before changing or inspecting the tool. Do not exceed the recommended speed and feed parameters for the workpiece material being machined.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 82 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Angle\u003c\/strong\u003e: 41 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Nose Diameter\u003c\/strong\u003e: 0.3700 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes Pilot\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Chamfering, Countersinking, Deburring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.8 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 78125002\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51747493216562,"sku":"78125002","price":387.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/09182f1ef12e7b4c042bec7a600322af.jpg?v=1788881302","url":"https:\/\/voomisupply.com\/products\/m-a-ford-78125002-countersink-82-degree-6-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}