{"product_id":"m-a-ford-78018706-countersink-120-degree-6-flute-carbide","title":"M.a. Ford. 78018706 Countersink 120 Degree 6 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 78018706 is a solid carbide countersink designed for chamfering, countersinking, and deburring operations in metalworking and fabrication applications. Built with a 120-degree included angle and six flutes, this tool delivers clean, consistent results across a wide range of workpiece materials. The straight cylindrical shank measures 3\/16 inches in diameter, and the overall length is 1.5 inches, making it well-suited for close-tolerance work in drill presses, CNC machining centers, and manual mills. Solid carbide construction provides rigidity and wear resistance across demanding cutting cycles.\u003c\/p\u003e\u003cp\u003eThis countersink is intended for use in machine shop, tool-and-die, and production environments where precise chamfer geometry is required. Its right-hand cutting direction and single-end design make it a standard choice for machinists and fabricators working with a broad spectrum of metals and non-metals. The 0.04-inch tip diameter allows entry into smaller pre-drilled holes for accurate seat preparation and edge cleanup.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120-degree included angle for standard chamfer and countersink profiles\u003c\/li\u003e\n\u003cli\u003eSix-flute design for smooth cutting action and improved chip evacuation\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and extended tool life\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction, single-end configuration\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank for broad machine compatibility\u003c\/li\u003e\n\u003cli\u003eNo pilot required — simplifies setup and reduces tooling cost\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on alloy steel, aluminum, brass, cast iron, high-nickel steel, high-tensile steel, magnesium, magnesium alloy, mild steel, Monel, plastic, and stainless steel workpieces. Fits standard 3\/16-inch collets and chucks.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and operation should be performed by a qualified machinist or tooling technician. Secure the shank firmly in a compatible collet or drill chuck before use and verify runout is within acceptable limits for the application. Always power down and de-energize the machine spindle before changing or inspecting tooling. Follow applicable shop safety procedures and machine manufacturer guidelines when setting speeds and feeds for carbide cutting tools.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 120 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenterline Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Diameter\u003c\/strong\u003e: 0.04 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Pilot\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Applications\u003c\/strong\u003e: Chamfering, Countersinking, Deburring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.024 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112812\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 78018706\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51744796279090,"sku":"78018706","price":41.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b5ff916ddf49a9d38a41c53c27267f2c.jpg?v=1788860631","url":"https:\/\/voomisupply.com\/products\/m-a-ford-78018706-countersink-120-degree-6-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}