{"product_id":"m-a-ford-60050004c-countersink-100-deg-1-flute-carbide","title":"M.a. Ford 60050004C Countersink 100 Deg 1 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD 60050004C is a single-flute solid carbide countersink designed for precision chamfering, countersinking, and deburring across a wide range of materials. It features a 100-degree included angle and a straight-cylindrical shank measuring 1\/4 inch in diameter. The overall length is 2.375 inches, and the head diameter is 0.5 inches. The cutting range spans from 1\/16 inch minimum to 29\/64 inch maximum cutting diameter. The carbide cutting geometry delivers clean entry angles on both ferrous and non-ferrous substrates. Licensed machinists and tooling specialists typically select this countersink for high-precision hole prep in production and maintenance environments.\u003c\/p\u003e\u003cp\u003eThis countersink is suited for use on alloy steel, mild steel, stainless steel, cast iron, high-nickel steel, high-tensile steel, Monel, aluminum, brass, magnesium, magnesium alloy, and plastic. The right-hand cutting direction and single-flute design make it effective for controlled material removal in both manual and CNC-driven applications. It is appropriate for light chamfering of fastener seats, deburring drilled holes, and preparing countersunk screw recesses in both production shop and field maintenance scenarios.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100-degree included angle for standard and wide-angle countersink profiles\u003c\/li\u003e\n\u003cli\u003eSingle-flute geometry for smooth, chatter-resistant cutting action\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for extended tool life on hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical 1\/4 inch shank compatible with standard collets and chucks\u003c\/li\u003e\n\u003cli\u003eCutting range from 1\/16 inch to 29\/64 inch suits a broad range of fastener sizes\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction for use with conventional CNC and drill press setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct procurement countersink for standard 1\/4 inch straight-shank toolholders, collets, and drill chucks used in CNC machining centers, drill presses, and hand-held drilling equipment.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis countersink is installed by machinists and tooling technicians using a standard collet, end mill holder, or drill chuck sized for a 1\/4 inch straight shank. Ensure the machine spindle is fully stopped and locked out before changing or seating the tool. Verify shank seating depth and runout before beginning a cut to avoid premature tool wear. Carbide tooling is brittle  -  avoid side-loading or impact contact during setup and storage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 100 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Cutting Diameter\u003c\/strong\u003e: 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Diameter\u003c\/strong\u003e: 29\/64 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Brass, Cast Iron, High-Nickel Steel, High-Tensile Steel, Magnesium, Magnesium Alloy, Mild Steel, Monel, Plastic, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Chamfering, Countersinking, Deburring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0873 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112812\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 60050004C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51740859105586,"sku":"60050004C","price":160.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ef11be048c710d1b17bfd88c54a4d318_037746b1-b94c-49cb-901b-f416ffe54ff6.jpg?v=1788827923","url":"https:\/\/voomisupply.com\/products\/m-a-ford-60050004c-countersink-100-deg-1-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}