{"product_id":"m-a-ford-60012503-countersink-90-deg-1-flute-carbide","title":"M.a. Ford. 60012503 Countersink 90 Deg 1 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 60012503 is a single-flute solid carbide countersink designed for precise 90-degree countersinking operations in a wide range of materials. Built from solid carbide throughout, this tool delivers the rigidity and edge retention needed for consistent, clean countersink profiles in production and maintenance environments. It features a 1\/8-inch straight cylindrical shank, a 90-degree included angle (45-degree centerline angle), and an overall length of 1.5 inches. The bright, uncoated finish suits general-purpose applications where coating is not required. Machinists, tool and die makers, and CNC operators are the primary installers and users of this tool.\u003c\/p\u003e\u003cp\u003eThis countersink is suited for use on alloy steel, mild steel, high-tensile steel, high-nickel steel, stainless steel, cast iron, Monel, aluminum, brass, magnesium, magnesium alloy, and plastic. It is appropriate for both manual and CNC machining setups where a 90-degree countersink profile is required for fastener seating, deburring, or chamfering. The 1\/8-inch shank makes it compatible with standard collet chucks, drill chucks, and small-diameter toolholders found in bench mills, CNC machining centers, and drill presses.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e90-degree included angle produces standard fastener-seat countersinks\u003c\/li\u003e\n\u003cli\u003eSingle-flute geometry reduces chatter and improves finish in a variety of materials\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides hardness and wear resistance across ferrous and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003e1\/8-inch straight cylindrical shank fits standard collets and drill chucks\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for general-purpose countersinking without coating compatibility concerns\u003c\/li\u003e\n\u003cli\u003eCompact 1.5-inch overall length for use in tight setups and small-format machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for countersinking operations in alloy steel, mild steel, high-tensile steel, high-nickel steel, stainless steel, cast iron, Monel, aluminum, brass, magnesium, magnesium alloy, and plastic. Compatible with any spindle or chuck accepting a 1\/8-inch straight cylindrical shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall in a collet chuck or drill chuck rated for 1\/8-inch shank tooling and confirm runout before starting a production run. Secure workpieces firmly before operation; loose material can cause tool deflection and irregular countersink profiles. Use appropriate cutting speeds and feeds for the workpiece material per the toolmaker's recommendations. Inspect the cutting edge before each use and replace the tool if chipping or wear is observed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenterline Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip\/Nose Diameter\u003c\/strong\u003e: 0.030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Pilot\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Countersinking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.015 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112812\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 60012503\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51732307378482,"sku":"60012503","price":35.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/be1b51a8b2db208fef761d8e28b393c4.jpg?v=1788741459","url":"https:\/\/voomisupply.com\/products\/m-a-ford-60012503-countersink-90-deg-1-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}