{"product_id":"m-a-ford-42250030-sc-1-carbide-abrasive-bur-1-4-inch","title":"M.a. Ford 42250030 SC-1 Carbide Abrasive Bur 1\/4 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD 42250030 is a carbide abrasive bur in the SC-1 cylinder with radius (ball nose cylinder) configuration, designed for aggressive material removal and surface finishing in metalworking and fabrication applications. With a 1\/4-inch cutting diameter and a 1\/4-inch shank, this bur fits standard die grinders and rotary tools used daily in shop and field environments. The fine tooth style produces a smoother finish with reduced chatter on hard and abrasive materials. Rated to 45,000 RPM, it delivers consistent cutting performance across a broad range of metals. Installation and use require no special tooling beyond a compatible collet-style grinder.\u003c\/p\u003e\n\u003cp\u003eThis bur is suited for deburring, contouring, chamfering, and weld preparation on steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium. The ball nose cylinder profile makes it especially effective for internal radius blending, port work, and cavity finishing where a flat-end bur cannot reach cleanly. Fabricators, tool-and-die machinists, and maintenance technicians routinely reach for this profile when working in confined areas or blending complex curved surfaces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSC-1 ball nose cylinder profile for internal radius blending and contour finishing\u003c\/li\u003e\n  \u003cli\u003eSolid carbide head construction for hardness and wear resistance on tough materials\u003c\/li\u003e\n  \u003cli\u003eFine tooth style for smoother surface finish and reduced vibration\u003c\/li\u003e\n  \u003cli\u003e45,000 RPM maximum speed rating for use with high-speed die grinders\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch shank fits standard collet die grinders and rotary tool chucks\u003c\/li\u003e\n  \u003cli\u003eUncoated head — no coating delamination risk on abrasive or interruptive cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/4-inch collet die grinders and rotary tools. Suitable for cutting and finishing operations on steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium per the manufacturer material application specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist, fabricator, or maintenance technician using a compatible die grinder with a 1\/4-inch collet. Ensure the grinder is powered off and the collet is fully tightened before operation. Do not exceed the 45,000 RPM maximum speed rating. Wear appropriate eye and face protection per applicable shop safety standards whenever operating rotary cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Specification\u003c\/strong\u003e: SC-1-F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Shape\u003c\/strong\u003e: Ball Nose Cylinder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.250 inches (1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Style\u003c\/strong\u003e: Fine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 45,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Coating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metals, Superalloys and Titanium, Hard Materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112809\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 42250030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51732912996658,"sku":"42250030","price":45.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0d9773f2080b23b5733f43781ce97258.jpg?v=1788748827","url":"https:\/\/voomisupply.com\/products\/m-a-ford-42250030-sc-1-carbide-abrasive-bur-1-4-inch","provider":"Voomi Supply","version":"1.0","type":"link"}