{"product_id":"m-a-ford-30203600-micro-drill-bit-no-64-solid-carbide","title":"M.a. Ford. 30203600 Micro Drill Bit No. 64 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe M.A. FORD. 30203600 is a solid carbide micro drill bit sized at No. 64 wire gauge (0.0360 inches diameter) with a 130-degree split-point geometry and a bright, uncoated finish. Built from solid carbide throughout, it delivers the rigidity and edge retention needed for small-hole work in hard and abrasive materials. The overall length is 1.5 inches, with a flute length of 0.400 inches and a 1\/8-inch straight-cylindrical shank. The fast spiral flute promotes chip evacuation in deep micro-hole applications. This bit is installed and used by machinists, tool-and-die technicians, and precision fabricators working with CNC machining centers, drill presses, and manual machines.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for production and maintenance drilling in cast iron, hardened steel, stainless steel, alloy steel, carbon steel, aluminum, non-ferrous metals, tool steel, and special alloys. Its solid carbide construction makes it particularly effective where high-speed steel tooling loses edge integrity due to heat or material hardness. Typical applications include precision hole-making in aerospace components, medical device parts, mold and die work, and general metalworking where tight diameter tolerances are required. The right-hand cutting direction and two-flute spiral configuration are standard for CNC and manual drilling operations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo. 64 wire gauge size — 0.0360-inch decimal diameter for precision micro-hole work\u003c\/li\u003e\n\u003cli\u003e130-degree drill point angle optimized for drilling into hard and stainless materials\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides superior wear resistance and rigidity versus high-speed steel\u003c\/li\u003e\n\u003cli\u003eFast spiral flute type promotes efficient chip evacuation in micro-diameter drilling\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — compatible with cutting fluids and suitable for a wide range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance held to +0.0000 to -0.0005 inches for consistent, accurate hole sizing\u003c\/li\u003e\n\u003cli\u003eManufactured to ISO 9001:2015 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 1\/8-inch collets, drill chucks, and toolholders on CNC machining centers, drill presses, and manual machines. Compatible with workpiece materials including cast iron, hardened steel, stainless steel, alloy steel, carbon steel, aluminum, non-ferrous metals, tool steel, and special alloys. Coolant-through is not supported; external cutting fluid application is recommended for extended tool life.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed with the machine fully powered down and spindle at rest. Secure the 1\/8-inch straight-cylindrical shank firmly in a properly sized collet or drill chuck to minimize runout, which is critical at micro diameters. Do not exceed the recommended feed and speed parameters for the workpiece material and machine type. Inspect the cutting edges under magnification before use, as solid carbide micro drills are brittle and susceptible to chipping if dropped or improperly handled.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire Gauge)\u003c\/strong\u003e: No. 64\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.0360 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.400 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Fast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Hardened Steel, Non-Ferrous Metal, Stainless Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Alloy Steel, Aluminum, Carbon Steel, Cast Iron, Non-Ferrous Metals, Special Alloy, Stainless Steel, Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 9001:2015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30203600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51754337337650,"sku":"30203600","price":17.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a1bc4d956256abeb31166caebfc994b3_3bed8b73-3a86-46a5-8df0-70865c2ed425.jpg?v=1788944474","url":"https:\/\/voomisupply.com\/products\/m-a-ford-30203600-micro-drill-bit-no-64-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}