{"product_id":"m-a-ford-30202602-micro-drill-bit-size-71-solid-carbide","title":"M.a. Ford. 30202602 Micro Drill Bit Size 71 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe M.A. FORD. 30202600 is a micro drill bit designed for precision drilling in tight tolerances and small-diameter hole applications. Built from solid carbide, this bit features a 130-degree point angle optimized for hard and abrasive materials. The bright\/uncoated finish suits a wide range of workpiece materials without the heat buildup associated with some coatings. At 0.0260 inches in diameter (Wire Size 71) and an overall length of 1.5 inches, it is sized for close-tolerance work in machining, tooling, and fabrication environments. Licensed machinists, tool-and-die makers, and precision metalworking shops are the primary users of this style of drill.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for drilling cast iron, hardened steel, stainless steel, alloy steel, carbon steel, aluminum, non-ferrous metals, special alloys, and tool steel. The fast spiral flute promotes chip evacuation during through-hole and blind-hole operations. The straight-cylindrical shank at 1\/8 inch diameter seats directly into standard drill chucks and collet holders, making it compatible with CNC machining centers, drill presses, and handheld precision drilling setups where the shank size is supported.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e130-degree point angle suited for drilling steel, cast iron, and stainless steel\u003c\/li\u003e\n  \u003cli\u003eWire Size 71 diameter (0.0260 inches) for small-diameter, close-tolerance holes\u003c\/li\u003e\n  \u003cli\u003eFast spiral flute design promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish compatible with a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical 1\/8-inch shank fits standard chucks and collet holders\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction; 2-flute configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible workpiece materials include cast iron, hardened steel, stainless steel, alloy steel, carbon steel, aluminum, non-ferrous metals, special alloys, and tool steel. Fits standard drill chucks and collet holders accepting a 1\/8-inch straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this micro drill bit should be performed by qualified machinists or tooling professionals familiar with small-diameter carbide tooling. Secure the shank firmly in a compatible collet or chuck before operation to prevent runout. Carbide is brittle and susceptible to breakage from side loading, impact, or improper feed rates — use appropriate speeds and feeds for the workpiece material. Inspect the cutting edges before each use and replace the bit if chipping or wear is detected.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: 71\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.0260 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.3200 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Fast)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 302\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0003 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: M.A. FORD.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30202602\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M.A. FORD","offers":[{"title":"Default Title","offer_id":51728679338290,"sku":"30202602","price":16.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a1bc4d956256abeb31166caebfc994b3_811744fc-1bb2-4dda-8f21-de6efb342976.jpg?v=1788694876","url":"https:\/\/voomisupply.com\/products\/m-a-ford-30202602-micro-drill-bit-size-71-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}